• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    jlg 40e "procedure fault"

    No, you got his brother!
  2. B

    jlg 40e "procedure fault"

    Well, after the delay, almost 2 years went by! I was very surprised to see a notification on this thread after all this time. We ran through a long diagnostic sequence and voodoomojo ruled out some things, but it still wasn't working. I can't recall the exact sequence of what happened after...
  3. B

    jlg 40e "procedure fault"

    Wow, that would be great. PM me and we will set something up. THANKS!!
  4. B

    jlg 40e "procedure fault"

    Looks like we are on rain delay now. Thank you so much for your help so far. I will get back on it when it isn't raining and continue the saga...
  5. B

    jlg 40e "procedure fault"

    WOrking on it. Odd... started with changeover via output from terminal A on controller. Pedal not depressed, output to pump motor is -48 (and zero to traction motors). Pedal depressed, zero to pump motor and -17.5 volts to traction motors(??) Control inputs have no effect on either. I will...
  6. B

    jlg 40e "procedure fault"

    OK, we are on the same page. The contactors are labaled incorrectly in my JLG parts book! When pedal is depressed, output of main is energized. I also checked downstream of 200A and 80A fuses, and both are energized with pedal depressed.
  7. B

    jlg 40e "procedure fault"

    Yes, it is -48 in that situatiuon. I can feel it/hear it engage when I remove and replace the blue wire. You are talking about contactor #1 in your picture illustration above, right?
  8. B

    jlg 40e "procedure fault"

    OK, here's what I have so far. With pedal depressed and any boom function switch activated, I have +48 at both sides of 7 amp fuse, at terminal 16 of the strip on the tach interface board (with it still plugged in), at the red/white connectors on the drive reverse contactor, and at the...
  9. B

    jlg 40e "procedure fault"

    I'm on it. Please move to anywhere... I just posted here because the search led to the other JLG 40 question.
  10. B

    jlg 40e "procedure fault"

    Hi Folks, I hope the Jlg experts out there can help me with this one. JLG 40e worked great until last fall when it just stopped responding. Flash code on controller was one flash, internal fault. Controller replaced, batteries replaced, but unit still will not go fwd/reverse or move boom...
Top