• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    cat scraper tractor-sheeps foot roller

    Im not sure if it was a scraper or not I just assumed it was a scraper. Ill ask around. I think they had a couple of them. They used to do a lot of big dirt jobs around Mo and Ks. Hopefully you found a good job to replace the one you lost.
  2. C

    Steep slope work

    Not sure about the H but with my R keep I would keep an eye on the finals. Mine leak into the the transmission. Not cool but it is what it is. As with Oxbow no proplems with crankcase.
  3. C

    862 Deere engine rebuild

    If i am not mistaken and it is a John Deere engine that should just be a 404 used in the 30 series tractors or 466 engine used in the 40 series tractors . They are the same engine used in ag tractors in the 70 and 80s. If it is a sixtys model its the same engine that is in a 5020 JD tractor.
  4. C

    cat scraper tractor-sheeps foot roller

    That was Loch construtions 621 roller from Maryville Missouri. They have been around for years until this past winter they closed up shop and put their equipment on IRON planet. Kind of a shame some friends of mine lost thier jobs.
  5. C

    Fiat allis FG 65C Motor Help

    Quick parts in Futon missouri 573 642 2258 Or Minne Parts in Minneapolis 612 379 0606 Ive bought alot of Fiat parts from both and been very happy with them
  6. C

    Reliability and parts for a Fiat Allis FD175

    Yep C 130 Turbo Props out of Rosecrans in St Joe Ive been an engineer for about 18 yrs and in the guard for 23. Im live in Smithville but 95% of my work is around the Plattsburg Stewartsville Lathrop metroplex's
  7. C

    Case 1680-----New Holland D180 R they the same machine.....ur experience with them?

    My buddy had a 180 it started out good but buy 5000 hours it was a maintenace nightmare. The computer went south along with the fingertip steeering the fuel pump went out numerous times. Electronics where junk the dealerships and manufacture couldnt even figure it out. O2DMAX worked on that...
  8. C

    Reliability and parts for a Fiat Allis FD175

    You can still get parts for these dozers through New Holland dealers and Quick Parts in Fulton Missouri. I had one for a couple years and about 1800hrs I had some problems but, the machine had damn near 20000 hours on it. It was a powerful tractor. Where are you located in Missouri?
  9. C

    CAT D6r quetions

    I have a 2005 6R And have to agree Constructo 3306 was much better maint wise. I spent about $7500 on a reman huie pump and 6 injectors this winter. Now that we got that fixed it runs tip top but with the 3306 this would have not been an issue and of the c9s I know of injectors and or huie...
  10. C

    Your first piece of equipment owned or operated was?

    Mine was a 9180 Case International tractor with tandem 19 yard Rynolds scrapers
  11. C

    I need to find a head gasket for 1992 hitachi ex60urg

    Might be a dumb queston but, what engine does Hitachi have
  12. C

    Case 1845c Skid Steer Problem

    They are normal fuses (not tube type) they may be taped up in the wire loom. Its been 10 years since it happended the first time but i think they may be taped up with electrical tape just about three or four inches from the lower back corner of the cab right side if you are sitting in it. I...
  13. C

    Case 1845c Skid Steer Problem

    There are a couple fuses behind the cab on the right side in the engine compartment. They are in the wire harness attached to the back of the cab. They are hard to see. Mine did the same thing
  14. C

    Hitachi, who owns it anyhow

    Im not sure in Iowa you are located but Murphy Tractor handles Hatachi. They have dealerships in Iowa Missouri and Nebraska.
  15. C

    Filling a pond....

    How much dirt do you have in the dam bove the elevation of the silt and water? I guess im saying most of the time in northwest Missouri you can bridge good dirt over the mud and just forget about the mud. If you start on both ends of the dam and push towards the middle it will push the water...
  16. C

    Lets see your "ultimate" service truck!

    Good looking 175 let me guess dead battery LOL
  17. C

    Fiat Allis FD9

    Kwik parts in Fulton Mo might be able to locate one they just found a head for a 10 B for a buddy of mine. 573 642 2258 I had an FD 175 that the motor went south last winter and they found a head for it too. Had to go between them and Minn Parts but we found all the parts.
  18. C

    CAT D6R w/C9 fluttering under load

    Prob wouldnt be fun if they don"t solve it this time since this is my dozer and I have spent around 10 grand on trying to get this prob solved! Can't complain about the dealer at all they bent over backwards to get it fixed and they credited my account for two of the three service calls they...
Top