• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Dr. Dozer

    Trying to find the cross reference for Case 9020 and Linkbelt

    2700cii Yes sir,sure is. 9010 IS 2650CII -9020 is 2700CII and so one. Then the B models correspond to the Quantum series Link Belt
  2. Dr. Dozer

    Trying to find the cross reference for Case 9020 and Linkbelt

    yes,that's what I have down too,but fot the Quantum/B series. I have some new aftermarket here if you decide to go that way too. They work good and we have been selling them about 6 yrs now
  3. Dr. Dozer

    Trying to find the cross reference for Case 9020 and Linkbelt

    9020 is the same as the 2700CII and the 9020B is the 2700Q. 165636A1 which subs up to 168788A1 is the ECU for the B model
  4. Dr. Dozer

    Deere 450C clutch issues

    if you change the clutch you need to remember there is a JD adjustment gauge/tool to set the finger height or you will be splitting her in 2 again.
  5. Dr. Dozer

    Trying to find the cross reference for Case 9020 and Linkbelt

    9020 is equal to the 2700CII other than the paint,engine and cooling pretty much. You should be able to use the case solenoid
  6. Dr. Dozer

    580E injection pump installation???

    YEP,I'll second that,they are easy to break off for sure
  7. Dr. Dozer

    580E injection pump installation???

    AND the one above it in the pump,that one can wreak havoc on the pump.
  8. Dr. Dozer

    580E injection pump installation???

    Yes sir,long as you got the rest of the motor lined up ,bolt it up -REMEMBER to put the lock pins in the unlocked position ,prime it and crank her up
  9. Dr. Dozer

    580E injection pump installation???

    ,you will see a plastic timing pin under that pump at about 5 o'clock to it. You should be able to push the pin when you roll it around to TDC. Be sure you have #1 cyl valves both closed on the compression stroke. Then you have a plastic cap in front on the timing cover that screws out covering...
  10. Dr. Dozer

    what oil can I use in trans axle of a 580K,

    I agree with Blitz 38 on both posts, but remember the 580K below 20,000 ser# really only has a direct drive type trans,which is what the Case dealer was probably thinking--but it does have wet brakes,so that won't fly as we all know. The later than 20,000 ser# or Phase II , III K, and Super K...
  11. Dr. Dozer

    Value Cat E70B? worth fixing up?

    i'd buy the thing for parts and let you make a few bucks on the deal too if you wanted to sell it ?
  12. Dr. Dozer

    CAT D3B Simple question

    e-bay is a great place to find manuals at a reasonable price. I get quite a few from there and save alot of $ that way.
  13. Dr. Dozer

    Komatsu D31P-16 Track Adjuster Parts?

    I'm not sure if there are any aftermarket parts for the -16 series. I know there are for the -18 and 20 but those are differnt than that earlier 16.We have one of those machines here that came in recently if you ever need anything. Rex is a good guy too,we trade with him regularly.
  14. Dr. Dozer

    John Deere 410 - Hydraulic is dead

    Coupler that drives the front main pump stripped and spinning on the spline shaft?
  15. Dr. Dozer

    Track motor on Samsung 130SE

    you got that right ,it can get to be alot of fun doing it that way.Off is much easier and more sanitary.
  16. Dr. Dozer

    Track motor on Samsung 130SE

    they are pretty easy to work on. If you give me a fax # I would be glad to send you a break down of it
  17. Dr. Dozer

    Deere 4219 engine

    got any casting #'s on that crank?
  18. Dr. Dozer

    Isuzu 6BD1T excavator engine

    you will need the exact serial # and model stamped into the block just below the head in order to get the correct ones. I can usually get these if you don't have any luck
  19. Dr. Dozer

    Deere 4219 engine

    those parts are pretty reasonable too if you want to fix it. Then you would know what you got
  20. Dr. Dozer

    What Are The Best Tools On The Market?

    Snap on has some rally good quality tools,also Williams and Cornwell make some really good stuff if you can find it I have a few Williams ratchets that have a great feel to them and have held up to plenty of abuse
Top