• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    1986 Mitsubishi 120-8 with Mitsu 6D14 6cyl diesel

    it is a accumulator of pilot system!
  2. D

    komatsu pc210-5k repair manual and parts manual

    i do have a complete repair workshop repair manual for the pc 210-5 komatsu excavator, i could send you one, just send a message.
  3. D

    Galion 150 Refurbish

    you guys are really fantastic!!
  4. D

    Komatsu pc 180 question

    what series is your PC180? I mean a dash 5 or 6 series. If its a dash 5 series, the problem is probably in the opening of the main pump's swash plate. ( possibly always in full stroke). There's a sensor in the side of engine's bellhousing that monitors the engine rpm, this sensor gives input...
  5. D

    run without hydraulic cooler ?

    The sole purpose of hydraulic oil cooler is to cool the circulating hydraulic oil in the system. Bypassing the cooler would jeopardize the entire system and would lead to more costly repair. I suggest you just bring it to a radiator shop and leave the work to them.
  6. D

    sevice manuals

    service manual of komatsu PC210-5 Good day steve, could you please send me a repair manual of komatsu PC210-5 or any PC200 dash 5 series.My email is domsant17@yahoo.com.
  7. D

    sevice manuals

    Try to look at www.epc4you.com
  8. D

    travel speed problem of komatsu pc210-5

    Sir John C. is probably right on track. So all i have to do is to pressure test the lines going to swivel joint and then to travel motors. Could anyone provide me a repair manual of PC210-5?
  9. D

    What would be the best hammer or breaker for a PC200-8

    If you want a cheaper breaker unit that's quite reliable, you can install a SOOSAN 70 to your PC200.It's a korean made breaker which in my experienced is quite good.
  10. D

    travel speed problem of komatsu pc210-5

    It has 16425 hours in it
  11. D

    travel speed problem of komatsu pc210-5

    I have a komatsu Pc210-5 which has a problem with its travel speed.The speed does not change if I touch the travel speed selector, but the indicator changes as I select from Low to High and vice-versa. It seems locked in high speed because it has difficulty in climbing. What could probably be...
  12. D

    installing breaker to komatsu pc210-5 excavator

    Thank's to all!! I'm really grateful to all the members who reply to this thread. Lots of info had been given that contribute much to a precise and easy handling of my works. Once again, thanks and more power to all!!
  13. D

    Oil Cooler Repair

    Well, You have to drain the hydraulic tank first before removing the oil cooler. If the leak comes from a single pinhole you can just condemed it, but if the leaks are too many, you have re-core the oil cooler.( re-coring means changing the entire core with new cores.
  14. D

    installing breaker to komatsu pc210-5 excavator

    Actually I am referring about the plumbing on the machine. There are two valve block located near the foot of the boom, and there,s a valve that needs to be open/close. Do I have to close the valve on the supply line and open the valve of the return line? Greatly appreciate any help. Thanks &...
  15. D

    installing breaker to komatsu pc210-5 excavator

    I'm planning to install a reconditioned breaker to my unit but i'm at lost to how the piping goes. how will i know the discharge line and the return line to be sure. :confused:
  16. D

    Komatsu PC128 - Codes and Computer Self Diagnosis - Help Please!

    Sir John C, y'd help me a lot before and i am very appreciative about it. Sir, I will take advantage of this opportunity to ask you once more regarding fault codes of PC210-5. Codes #14 and 18 are still registering in engine control board with green light in machine computer. could you please...
  17. D

    Kobelco hydraulic excavators

    I agree with mr. Kobelco. all you have to do is to check/change the two check valves found inside the fuel feed pump. It's the inlet and outlet check valves, sometimes only the tensioner spring is the culprit. you can buy the set of check valves with the spring.
  18. D

    PC210-5 Diagnostic codes

    I am currently doing some troubleshooting for my pc210-5 excavator. Had done almost all leaks and i'm in the process of checking the electronic engine controller. There's three diagnostic codes appearing in the computer. Does anyone knows what are these? Codes 13, 14, and 18 are the codes...
  19. D

    Komatsu PC128 - Codes and Computer Self Diagnosis - Help Please!

    thanks for the reply Thank tou very much sir for your very informative reply to my query. More power to you..:)
  20. D

    Komatsu PC128 - Codes and Computer Self Diagnosis - Help Please!

    Sir John C, could you please provide me the codes for PC210-5 excavator? I am having problem with my PC210-5 going to limp mode and displaying codes #13, 14, and 52. I would highly appreciate any help.. Thanks..
Top