• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Bobcat 610 hyd oil ?

    Changing oil on our 610 bobcat hyd. system should I use motor oil or AFT fluid? Thanks
  2. D

    Bobcat 610 hyd. oil ?

    I am would like to change the hyd oil on our machine, not sure what to use, I do not have a book on machine. any help would be great. Thanks
  3. D

    Case 1845c wire lume connector help

    Thanks guys, What I did whats disassemble the connector carefully, there was enough wire to crimp on a shirk butt connector and add a new wire to it. shirk it together and reinstall in the original plastic connector. Then I added a 2 pole weather pac connector to it and on to the wires where...
  4. D

    Case 1845c wire lume connector help

    On our 1845 the wire broke off of the connector on the wire lume. It is a 2 pin square plastic connector w/lock clip--AMP connector part # DJ623-E3.5 AVS Goes on senor on manifold Does any body know of a source to buy replacement connector to replace? Any body else have problem like this...
  5. D

    glow plug questions

    On ours Hitachi you turn the key on and wait for about 20 seconds and light goes off and your ready to go. I bought our machine and 2 were bad of 3. I added a blade type fuse in line, cause one shorted out and melted safety link. Was hard to find, down by the starter battery connection. This way...
  6. D

    Komatsu PC50UU-1 hydraulic thumb install pictures

    Thanks for info, planning to add a thumb over winter. Have machine close to yours EX40UR.
  7. D

    Komatsu PC50UU-1 hydraulic thumb install pictures

    Do you have the info on the valve that you used to split the 2 systems. Have machine also with offset boom. Like the electric valve set up Part# and source where purchased?????? Would be great help. Homemade thumb too? Thanks
  8. D

    over tire tracks

    I have a Case 1845c looking to get a set of tracks for it has anybody have any pro's or con's experiences using them on your machine. Looking at getting a set of these 2 bar type more self cleaning style. http://www.skidsteersolutions.com/Terra-Traxx-s/55.htm
  9. D

    Pics of your mini!

    Hitachi EX-40-UR Picture of my Hitachi EX-40-UR working on my house addition.
  10. D

    Case 1845C- fuel timing relay

    We have a Case 1845C. What does the fuel timing relay do for the machine? When checking the relays I found that our is bypass with a jumper wire. Not sure of its job? Maybe went bad and was jumper-ed out at one time? Should I order a replacement and reinstall or leave it. Thanks Jim
  11. D

    case 1845c vin number ID

    My 1845C is number JAF 0280278 what year would that make it. Thanks Jim
  12. D

    sevice manuals

    Looking for a Hitachi EX-40-UR service/part manual, thanks.
  13. D

    Case 1845c- draining water from fuel tank?

    We have purchased a Case 1845c skid steer, new to diesels how and where do you drain water water from diesel fuel tank? We always put a little fuel injection cleaner (lucas) in tank when we fill in up. How often should you drain? Thanks
  14. D

    Hitachi Ex120 Problem

    TOOL KING I sent you a PM , do you think you can help me out with my EX40UR? Thanks JIM
  15. D

    Snow removal question.

    I have a small dozer in Wisconsin tried to use it to move snow once, not a problem untill next day all tracks were frozen, idlers locked up and were wore flat on the tops. Unless you put into a good heated garage don't do it. I use a bobcat with a snow plow blade, 10 times faster and better job...
  16. D

    lower roller source

    Thanks for the reply, They had the rollers in stock at 1/2 of what John Deere was asking, we ordered 4 rollers. They carry all type of replacement track parts for many machines.
  17. D

    lower roller source

    I am looking for a aftermarket source for 2 lower track rollers for a Hitachi EX 40 UR mini excavator. Part# 901668 Any other sources besides John Deere? Thanks JIM
  18. D

    Hitachi excavator

    I have a EX40UR mini excavator, I think this may be your model: EX60 www.hitachi-c-m.com/global/pdf/products/excavator/medium/ex60-3/KS-E137.pdf it looks alot like your. I found manual for machine and engine too. JIM double click on this link
  19. D

    What Hyd. oil to use???

    I recently purchased a Hitachi EX40UR mini excavator and would like to change the hyd.oil and filter not sure what is the proper oil to use. Any suggestions? Thanks JIM
  20. D

    video excavator undress woman

    Found this video, not in English but pretty cool. www.youtube.com/watch?v=cuWSxFWv3Fo&playnext=1&list=PL6F884D1BC7941C22
Top