• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. wrwtexan

    Klutch Tools

    HAAAAAAAA!!! You bunch of debutants crack me up! I haven't logged into HF in 2 years after getting fed up with the better than though BS (Welder Dave; my crane pump mount is still to this day firmly in place where I welded it:p) but this was a post worthy of doing so! I bet most of you haven't...
  2. wrwtexan

    983B crank seized, now what?

    For all those who were watching this thread, I finally found the reason for the seizen. The last stab at identifying the problem, I was in my old service truck and lacked a couple of special tools I have now that allowed me to get to the remaining #4 rod cap off which is directly above the...
  3. wrwtexan

    IH 175C Master Link

    Here is an option that has worked for me on several machines lacking a master link. Both sides of my TD20B have this and makes for a low wear in outer panel and easily removable master pin. I pushed them out and polished them to a slip fit. Leave the bolt loose With a lock or double nut for...
  4. wrwtexan

    Where do you draw a line on forum member responcibility?

    I have heard of people using diesel (old #2) to do a quick flush at no load without issues. wornout wrench; One thing I am always quick to do when given sage advice is to show appreciation to those who have been willing to think deep, take time, and share their knowledge and experience with me...
  5. wrwtexan

    Cummins B3.9-P; hole in block from balancer weight

    Then a 4B is what I need. I have seen several on facebook marketplace for 1500 to 3K running. What I understand is a B3.9 is the ugly stepcousin to the 4B (3.9L) series. The 4's with no harmonic balancer must be drilled and counterweigthed internally.
  6. wrwtexan

    Cummins B3.9-P; hole in block from balancer weight

    I finally have an update on this hunk of junk. A service tech at Dallas Cummins was kind enough to find a parts breakdown of the offending balancer. With all our rain, I am getting some backlog and stale projects out and I made a call to see about parts. The balancer needs a shaft, 2 flyweights...
  7. wrwtexan

    You can't smell that?

    Silence is golden, duct tape is silver!
  8. wrwtexan

    801 Ford Diesel low compression after rebuild

    Wow. So had I. As I recall, I reringed it, had the valves checked over, and burned it in on my dyno. It was still a bit hard starting in cold weather but seemed to be good otherwise. Had a bit of an overrule issue we also had to deal with.
  9. wrwtexan

    Old IH 175 B Parts and Information Search

    The engine is the DT407, same as D361 and D407 used in 806 and 856 IH farm tractors. All States Ag parts will have the water pump. I have a TD20B which the oil cooler was ruined in and I mounted an used aluminum trans cooler with new hoses on it in front of the engine radiator. Ray's Used...
  10. wrwtexan

    You can't smell that?

    I think about all the hay balers that have burned because the softy operator is buttoned up in a nice AC cab with his tunes jamming and can't smell anything until its an inferno and then they let the baler AND tractor burno_O. I had a bearing fail and noticed an excess load but knew exactly...
  11. wrwtexan

    Land clearing, to burn or not to burn

    brush piles on farms smoldering for days before the fire either extinguished itself, was put out or was spread out to put out and buried. I can attest to that. I went into a pile to sift that had been burned for likely 2 months and halfway through the pile I had flames coming up beside me. The...
  12. wrwtexan

    Land clearing, to burn or not to burn

    I am on a 70 acres so far brush and mostly smaller junk timber clearing job now (when dry weather permits restart) with my D6C and a JD 790ELC hoe. I clear with the hoe, push it up with the 6, let it set for a couple of weeks, burn and tend it as far down as it will go, let it cool and sift it...
  13. wrwtexan

    983B crank seized, now what?

    I was supposed to meet with him and a local Cat guru before our latest monsoon set in and haven't been contacted since. With it drying out and on my mind, I'll make contact and see where the project is. I'm the only local equipped to handle it and the guru is contracted to a local landfill...
  14. wrwtexan

    Hydraulic driven waste oil pump

    Take a look at this. Good company to deal with and they have a tech staff to talk to. https://www.surpluscenter.com/Hydraulics/Hydraulic-Pumps/Pump-Motor-Combo/Delta-Power-Hydraulic-Pump-Motor-Unit-PM23-9-8527.axd
  15. wrwtexan

    D6C custom seat for tall operators?

    I am 6'2" and my helper is 6'7" and the original seat on my D6C is killing us. I ran 4 hours today and ended up with aching knees and a sore but. Has anyone successfully put a different maybe suspended seat on one despite the trans check and fill location?
  16. wrwtexan

    Local contractors out of hand

    As I don't want to hijack the thread, tell me if I need to start a new thread. This might help some getting into this line of work. I went to the DMV today and asked to start the application and was told the medi card had to be on file before starting. We then discussed what I was going to...
  17. wrwtexan

    Local contractors out of hand

    After reading through all of these posts, I did a bunch more research on the whole CDL requirements and will be going tomorrow to start the application. I had my CDL at TxDOT with government exemption for medi card and dropped it when I left thinking I wouldn't need it any more and didn't want...
  18. wrwtexan

    diference between power and shuttle shift on a tractor

    That IS a Shibaura with a synchronized transmission. and parts can be a problem to acquire. It is straight mechanical so there is a sliding gear or collar that has to engage with the driven gear of selected direction. A power shuttle (front loader,TLB, modern farm tractors) uses two hydraulicly...
  19. wrwtexan

    D6R 3306 mechanical dropped injector tip

    I have a young customer that has a D6R mechanical fuel that blew off a Cat Reman injector tip and caused all kinds of fun mayhem... He was told the engine was rebuilt 3500 hours ago and cylinder wear seems to match. He replaced the injectors last fall before our monsoon winter started and...
  20. wrwtexan

    How?? burned through piston within hour of startup...

    Same here Twister. I would have thought it would have sounded way different being that far off time.
Top