• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. 1

    Magic in a can

    Yep i found that rapid tap or buttercut threading oil & little heat does wonders. the best pentrating oil i found was what mystik oil used to make they dont make it any more
  2. 1

    Detroit cyl head & cat seal kits

    I got a reman 3 71 detroit cyl head i paid $600 for it i take $400 for it & 1 seal kits 7x 2765 for 627 cat scraper for the ejector plate & 2 seal kits 7x 2662 for 627 cat scraper bowl i paid $500 for these kits i let them go for $300 i got some misc cat parts i post later when i clean up my...
  3. 1

    Anyone use their dozer to pull a large offset harrow?

    I thougt that building and land looked like it was across from the farm park
  4. 1

    Anyone use their dozer to pull a large offset harrow?

    Hey MRRPM are you plowing across denton farm park
  5. 1

    580SE Hydraulic Pump Coupling

    you may get away with the pump shaft being worn for a while but it will let go when you are in a bind
  6. 1

    TD15c trans problem

    sound like the low clutch pack has come apart one of my custmor tractor did that one time while he was using it every thing else worked good
  7. 1

    Ok Who's Man Enough to Operate It?

    i remenber read a article years ago about some constrution company in calforina had painted all there equipment pink to keep it from geting stoled backed in the 50s and they still do today
  8. 1

    Ud 14 a power unit

    In august 2005 me & dad got our ud 14 a power unit out was going to show it at our county 100 year celebration we cranked it but couldnt the injector pump to worked when it was switched over to diesel so we figder we have to had the injector pump rebuilt so we just pulled it back to side of the...
  9. 1

    old ford needs help

    I belive it being 91 model this engine should be a mechaical unit injector engine The shutdown solnoid will 3 wires going to it its on the governer it be a round and will have little button sticking out of it in the middle
  10. 1

    Setting injector travel on a Cummins 855

    You dont adjust the nut on a top stop to set the injector you will mess the calbertion up to set one you just torque it down to 6 in pound all you are doing is elimating the free travel on the push rod. you probly done mess the nedlee and seat up in the injector because excessive injector travel...
  11. 1

    old ford needs help

    sound like fuel shutdown solnoid going bad they have redesign them several time to improve the life of them
  12. 1

    How do you diagnose a miss in a Cummins 855 engine?

    does this engine has top stop injectors or mvt timing on it or stc injectors
  13. 1

    Metal in hydrolics

    I think the e models had problem with cyl on the swing doing that i fix one that had a mess up cyl and hyd shop put a new tube on it for them for $600 Far as control valves if its was taking apart just clean and freeed up and not replaced that was a lot I done jobs like that take valves off the...
  14. 1

    Ford 555D Transmission Problems

    it may be the trans shiftter control i seen them go bad and cause that problem
  15. 1

    Fabrication of thumb stick bracket and stiff arm

    man your work looks like a man i know who does the same thing
  16. 1

    d11n Repair

    Steve your job looks like some i have seen some one know what there doing
  17. 1

    Ridiculous parts prices

    it's seem to me since eq manufacters aint selling eq they are jacking up prices on parts
  18. 1

    Need 1835 B Case skid steer drive motors

    thanks wille 59 may some body will come up with something. btw one motor is obsolte and the other is so damage it cheaper to replace it the new one replaces the old stlyes motors i have
  19. 1

    Need 1835 B Case skid steer drive motors

    wille 59 i done try ron he couldnt come up with nothing on these motors yep i done talked to customer about it
  20. 1

    Need 1835 B Case skid steer drive motors

    I am looking for 2 drive motors used or new I qoute a custmor prices on new ones and order them from my vendor then the vendor called me back said that they had miss qouted them they wanted much for them as i could get them from case and not to have wait a month for them.
Top