• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    How to change the boom lift speed at the end of boom operation?

    No. It can be used anywhere where loads need to be lifted and moved. The main idea was to ensure the accuracy of the positioning of the weight. For example, to accurately move it into a window between containers, etc. The first thing that came to mind was to reduce the speed of lifting/lowering...
  2. A

    How to change the boom lift speed at the end of boom operation?

    Thank you!
  3. A

    How to change the boom lift speed at the end of boom operation?

    I start thinking about this approach. because it can be a solution as well. If you look at the problem from the other side, one of the problems may be slowing down the boom when reaching the desired position. Not only at the end of the moving of the cylinder stroke but also in intermediate...
  4. A

    How to change the boom lift speed at the end of boom operation?

    Thank you for your answer! I will read the information!
  5. A

    How to change the boom lift speed at the end of boom operation?

    It could be the solution I think, but what to do if we need to stop in the middle of the length? Could you please write a brand or what equipment is on the picture? I would like to read about it also.
  6. A

    How to change the boom lift speed at the end of boom operation?

    Thanks for your answer. I am wondering if this proportional flow control valve does not reduce the pressure and if can we use it with L-S regulation and a variable displacement pump?
  7. A

    How to change the boom lift speed at the end of boom operation?

    Yes, I understand the L-S regulation is not my case. I found that the flow rate can be changed by changing the number of revolutions of the electric motor of an axial piston pump or by installing a hydraulic throttle. It is also probably possible to change the pump flow rate by changing the...
  8. A

    How to change the boom lift speed at the end of boom operation?

    Yes, exactly, I am going to use a cylinder with a position measurement system. I found this in Bosch. The problem is the next. I vaguely understood how L-S regulation works. The more weight we need to lift the more pressure we need and this L-S system adopts this pressure to the weight. But I...
  9. A

    How to change the boom lift speed at the end of boom operation?

    I don't know exactly the type or name (brand). This will be a machine for lifting the boom (weights) and rotating it. We are going to use Bosch or Danfoss equipment.
  10. A

    How to change the boom lift speed at the end of boom operation?

    Thanks for your reply! Intuitively, I also assume that it is necessary to reduce the pressure in the pilot line, but so far I have a vague idea of how to organize this and what equipment to use since the load does not change. Maybe you have articles or videos that well explain these operating...
  11. A

    How to change the boom lift speed at the end of boom operation?

    Hello there! I am designing a boom for load pickup, which also has to rotate. And one of the requirements is to reduce the speed of extension and rotation of the boom at the end of the ligting. What I mean by this. For the first 30 seconds, the boom has to lift at a speed of 0.3 m/s, and for the...
Top