• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Bobcat 753 Traction lock problem

    The only code I get is the 3 flashes on the BICS traction indicating the hold coil circuit shorted to ground. I have the wiring schematic which is very simple. sure would like the schematic for inside the BICS. thanks again for your reply Marv
  2. M

    Bobcat 753 Traction lock problem

    Bypass solenoid Atcoequip Thanks for the reply. I needed to move the bobcat so I unhooked the 3 wire connector. Measured the ohms and it is right at specs - .5 for the pull and 11.0 for the hold. Once I put 12 volts to the hold coil it only takes a micro second to momentarily energize the...
  3. M

    Bobcat 753 Traction lock problem

    bobcat 753 traction lock I've got the same problem and fairly stumped at this point. I've bypassed the wiring and ran the solenoid with external power and it runs just fine. If I hook it to the system then on start up it works for about 5 seconds then I get 7.5 volts on the hold side which...
  4. M

    wanted 7753 773C or 773F Backhoe Mounts

    backhoe mounts I have a set for a Bobcat 753 series which I'll part with if they will fit. Marv Schuh 4schuh@gmail.com
Top