• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Zed

    Ran Great Until It Didn't

    Great to hear you got it sorted :D
  2. Zed

    Ran Great Until It Didn't

    You mentioned taking the fuel/water sediment bowl off, did you check the filter in there, or was it in there? There should be a spring in the bottom of the bowl to hold element in place. That one I did was proper blocked up with real fine dirt. The fuel system shouldn't need priming, open the...
  3. Zed

    Ran Great Until It Didn't

    How did you go? I had a breakdown on a Kubota SVL75 the other day and it was running for a minute or so then engine would die. leave it 5 minutes then it would run but again a minute later die. I checked the fuel water separator and the filter element in there was nearly blocked solid. Looked ok...
  4. Zed

    Caterpillar Diagnostic Equipment

    2021A is out now
  5. Zed

    New Vision Link.... What the F did you guys do?

    Tell me about it, I work for Cat, and could see any machine worldwide. Now we need to get administrator approval from the dealers to see machines in their territory.
  6. Zed

    Cat hydraulic hose codes

    There's you info from HIS for that PN
  7. Zed

    Cat hydraulic hose codes

  8. Zed

    Cat HYDO oil alternative

    Why don't you get an SOS test done, you may find out the oil is ok and not needing to be changed at all.
  9. Zed

    More Cat 6015B and 6020B builds

    Just doing a job on 6030 AC/FS machine in Laos, can post some pics of that soon
  10. Zed

    New Cat 6020B

    There is a plan to design a FS attachment for the 6020B, but this is a long way off and I was told they won't start on that for at least a few years. I would have prefered they do it sooner, but it is what it is. There is not that much demand for smaller FS these days, though it would have been...
  11. Zed

    3-53 Detroit kicked my butt today

    Yep that will do I reckon, i've used anything like what you mentioned- we did use a lot called Bears contact cement. Its that glue that you put a light smear on, then wait for it to dry then apply your gasket. Make sure you prepped the mounting surface good with some sandpaper and then make it...
  12. Zed

    New Cat 6020B

    I was impressed that they don't seem to have knocked any paint of it yet!
  13. Zed

    New Cat 6020B

  14. Zed

    New Cat 6020B

  15. Zed

    New Cat 6020B

    Update: Here are some pictures of the same machine nearly 6 months later... It has nearly 3000 hours on it now.
  16. Zed

    3-53 Detroit kicked my butt today

    X3 on the 3M, sticks like sh*t to a blanket. Mandatory for working on the old 2 bangers. If you got face book there's a group called 'Detroit Diesel Enthusiast'. Plenty of blokes on there with stashes of parts.
  17. Zed

    More Cat 6015B and 6020B builds

  18. Zed

    More Cat 6015B and 6020B builds

  19. Zed

    More Cat 6015B and 6020B builds

  20. Zed

    More Cat 6015B and 6020B builds

Top