• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Paint for Case 1845C

    I failed to see that the original post is over a year old................Oh well, maybe it will eventually help someone.
  2. S

    Paint for Case 1845C

    If you are near a Blains Farm & Fleet, they sometimes have the Power Tan color in the paint department on the shelf where the rest of the implement paint is kept. About 2 years ago I was going to get some to touch up some scraped and rusted areas on my 1845C, but all they had were gallons. I do...
  3. S

    Case

    I have operated a Case 60XT for approx 15 minutes after a construction business owner asked me to try it out, and see why his employees leave it parked at the shop and take the older 1845C's. I have to agree that the controls react differently than the older 1800 series, but I believe if I had...
  4. S

    1845c lost the boom.

    I have often been curious about what position the auxiliary pedal should be in if you are not using the auxiliary. After I replaced a hose from the hydrostatic housing to one of the hydraulic drive motors, I saw that where there used to be a bolt that held the pedal in one position, was missing...
  5. S

    1845C broken Hydraulic Hose

    alrman, Sorry it took so long to get back. The local case dealer was open Saturday until noon. At 10:45A I finally got the hose off and they are about 45 minutes away. I made it in time but they did not have the hose I needed on hand. They normally stock 1, but they overnighted it to another...
  6. S

    1845C broken Hydraulic Hose

    I am in kind of a bind here, and would greatly appreciate some quick responses. Earlier today I was using the 1992 Case 1845C with the fork attachment to move around some heavy items...........homemade engine crane, weighs about 800 pounds. Also some old dock plates (levelers) that eventually...
  7. S

    Case 1845C Control Valve Rebuild Help

    alrman, Thanks for the diagram. I should mention that I had the seals replaced last fall, and by this spring with relatively little usage, it was leaking again. The seal replacement did not cure the bucket dropping. I will see about getting some new seals and check valves and see how that...
  8. S

    Case 1845C Control Valve Rebuild Help

    ATCO, Thanks for responding. The present valve is leaking fluid where a control lever goes in and out of the valve body. Also, when the bucket is tilted upwards to hold stuff in the bucket, it ( the bucket ) sometimes drops completely all the way down without the valve being operated. It is...
  9. S

    Case 1845C Control Valve Rebuild Help

    I have a 1992 Case 1845C that I am told needs a new, or the present control valve rebuilt. It may not be called a control valve, but it is the hydraulic valve that controls the raising and lowering of the bucket, tlilt, etc. Because of the cost of a new one, I would like to attempt to rebuild...
  10. S

    1845c wont hardly move when warmed up, either side, unless lowering bucket then goes

    dragracer, Just wondering what you found out. We bought a 1991 1845C as is because it has several problems. One of them being that it only has a slightly jerking forward motion (barely moves at all and jerks). Needs new flywheel......I guess it likes eating starters. More than likely I will...
  11. S

    Case 1845C Starting System

    Lost in France, I have not installed a solenoid kit yet, but I do have a diagram that shows the parts and locations. I think it is a pretty simple repair requiring basically general hand tools. It looks like the best way to do this would be to remove the starter from the engine. First you are...
  12. S

    Case 1845C Starting System

    Lost In France, There have been a lot of things happening lately, so I have not had a chance to try using the solenoid as a relay. I did have one mechanic at a local construction company tell me that they exclusively use the older model 1800 series Case skid loaders because their operators...
  13. S

    1845C hydraulic issue

    1693TA, If it is not too much trouble I could also use the repair manual info for this problem. Also a part number for the repair kit would be very much appreciated. I tried explaining the problem over the phone to my local Case parts guy, and he told me I needed to bring in the part, or give...
  14. S

    Case 1845C Starting System

    Z2898, Thank you for the information. I did replace all of the old wire and cables, and pretty much ended up with the old click, click problem, After reading your comment about a possible bad ground, I removed all of the ground wires and made sure I had a good clean contact area, put a very...
  15. S

    Case 1845C Starting System

    I have a 1992 Case 1845C that is getting to be one miserable possessed machine when it comes to starting it. In the last 2 years I have installed a rebuilt starter, then a new starter. I have also installed all new cables and wiring connected to the starting system, along with a new ignition...
  16. S

    Who uses a skid steer only at home?

    Hi, I am new here also. I have a 1992 Case 1845C with less than 2000 hours that we use around our property, and I use it for my part-time home based welding and fabricating shop. It sure comes in handy for positioning large, heavy, or awkward items I am welding or repairing. I made a set of...
  17. S

    1845C case Aux. Hydraulic problems

    Jamie, I was going to send you a private email, but I guess because I just joined I am not able to view certain areas, such as other members email addresses. What I was wondering, if you are not going to be using the Hi Flow, would you be interested in selling the Hi Flow parts if they will...
  18. S

    Common loader weld repair on Bobcat

    Hi, I am new to this forum and thought I might start out by providing some repair information that I hope others might be able to use. Later when I am able to post my own questions, you guy's will probably wonder if I even know how to start my 1845C. Anyways, my real full time job is being...
Top