• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. chansey

    Case 621B XT Wheel Loader

    It's time for me to ask the experts on what I should do with my dead loader. Engine seized on my 621B XT wheel loader. It's a 6 cyl CHN 590 rated at 138 HP with a VE injection pump I have a rebuilt 1993 Cummins 5.9 with HP rated at 160 HP. My thoughts are to use the 1993 Cummins engine long...
  2. chansey

    Trojan 1500Z Hydraulics

    My pump is on it's way out, slowly loosing hydraulic pressure and lift capacity. Need help locating a replacement pump The the front shaft bearing had failed and caused the gear sets in the first two sections to woble and tore into the housings. No go with Minpar or Deluxe-- not available...
  3. chansey

    Discussion: Dana/Spicer 3 Speed Powershift

    I have a 1989 1500Z Trojan Loader that that has a Dana/Spicer (Clark-Hurth) 3 Speed Powershift transmission and the transmission is being overfilled with hydraulic fluid. The overfill is about 4" above the full mark on the dip stick and then hydraulic fluid starts running out the bottom of...
  4. chansey

    Trojan Hydraulic Pump

    I Need advice from a hydraulics guru to assist in finding parts for my 1989 Trojan Loader. The 1500Z and 1700Z loaders use the same hydraulic pump. According to Weser Pumpen, the current pump is WP340-3 and only available in Germany at $500 more than I paid for the loader. The pump flange...
  5. chansey

    WTB Trojan 1500/1700Z Hydraulic pump

    Need hydraulic pump or front flange for a 1989 Trojan 1500/1700Z Current pump is Weser Pumpen WP340-3 2 stage gear pump The flange number is: Mounting flange SAE B Combi WP 340-1007. Must include shaft as a minimum Please forward any possibilities
  6. chansey

    WTB Trojan 1500/1700Z Hydraulic pump

    Need hydraulic pump or front flange for a 1889 Trojan 1550/1700Z Current pump is Weser Pumpen WP340-3 2 stage gear pump The flange number is: Mounting flange SAE B Combi WP 340-1007. Must include shaft as a minimum Please forward any possibilities
  7. chansey

    Fork Attachment Trojan Loader

    At some point or other we all wish we had a fork lift or a fork attachment for our skid or wheel loader. Looking at the yard, I realized that everything looked bulky and heavy. The use of the bucket on my Trojan 1500Z to do the work wasn't cutting it. Started shopping around the web and...
  8. chansey

    Clark-Hurth 3 Speed Transmission

    Just had a problem come up with my Trojan 1500Z with the HR Clark 18000 3 speed transmission. Oil has started spewing out of the breather near the charge pump. Did a Google search and was not able to find any info on the topic. The machine was repowered with a Cummins 4BT and connected...
  9. chansey

    Military Trailers

    Recently took advantage of the DoD offering of surplus military trailers and pick this little beauty up for the large sum of $420. Mow I want to make it into a 20 ft dump trailer. Here is what it looks like and the specs; Anyone have any experience with these trailers. Everything...
  10. chansey

    Wheel Loader Service

    I found a new way to service the undercarriage on a wheel loader. Now if I only had an electric grease gun Happened on level ground. Left front hit the vertical face of the bank, jerked the wheel out of my hand, right wheel continued to climb, bucket was in the air, the load shifted and...
  11. chansey

    Deutz Diesel

    Have a F5L912 engine complete that has new parts and needs assembly Has air compessor New 24V starter SAE #3 Flywheel housing Reground crank (.20 rod/.10 mains) All rebuilt injectors All cylinders in very good condition All new lower bearings Asking $1,750 OBO
  12. chansey

    Perkins 1004.4

    Need some assistance Have a 1989 JCB 1700b backhoe with the Perkins Phaser engine 1004.4 AH build. Need to find a replacement head. Mine is cracked and is not repairable. Any leads will be appreciated Paul
  13. chansey

    Trojan Loader Repower with Cummins 4BT

    This thread will document what needed to be accomplished to repower a 1989 Trojan 1500Z with a rebuilt Cummins 4BT with 130 HP. The engine repower will net a additional 37 HP over the Deutz F5L912. The original Deutz is a rebuilt engine (2006) that had a rod knock when I purchased the...
  14. chansey

    JCB 1700b

    Hi all, Need a little help. Loaned my 1700b Service Manual to a friend and now he can't find it. How do you loose a 500 + page manual? I removed the swing cylinder in the field to install a seal kit. Somewhere along the way the rod bushing was lost. Does anyone have a part number...
  15. chansey

    JD450 Issues

    Hi all, Bought a well used JD450 a year ago and have gotten more than $5,000 worth of work out of it. Now it's time to get some items repaired. When I initially purchased the dozer, the right steering clutch was a bear to engage when turning. Over time, it loosened up however it had a...
  16. chansey

    Jcb 1700b

    I have a 1989 JCB 1700B and need some help with some part numbers. Ordered a fuel cap from Minpar based on ser# and it was too big and would not lock. They stated that was the only one available. The cap lock tabs point toward the center and the distance for the tabs to engage the fill spout...
  17. chansey

    Trojan 1700Z with Deutz 5FL912

    Hi All, I have a 1989 1700Z Trojan Loader with a 5FL912 with a rod knock. Loader has good power. When initially started, there is no knock. Seems as that as the oil warms up, the knock starts and the knock becomes worse. I had the injectors rebuilt because I felt as though the engine was...
  18. chansey

    A-C H-11E Dozer

    Does anyone know the approximate weight of an Allis-Chalmers H-11E? Engine size/type? Good old machines--hard to find info Paul
  19. chansey

    Cas1155E

    Hi all from New Mexico Need a little help with a 1989 Case 1155E.... master link broke on RH side. Dealer says, "that chain is Case specific". The master link is not the alligator (tooth) type, rather it is more like a wave. Seaching the net, I found one that is...
Top