• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    Land plane / land sculptor

    Don’t know but it looks like it would speed my work in yards up grading after drainfields. I found one on eBay for a little less than 2000.00 probably would be awesome coupled to a tilt tach
  2. P

    Land plane / land sculptor

    does any body have any thoughts on land planes in particular the land sculptor from bradco?
  3. P

    Spreading fill

    I just wondered what my productivity was like compared to others. The job I was working on yesterday was filling lows where water stands in a horse pen. Just graded by eye with clean sand as fill material. The machine is a t590 bobcat the loads are trim axle. Thanks for the responses
  4. P

    Spreading fill

    how many loads of fill should a mid sized ctl be able to rough spread per hour
  5. P

    T590 compromised hydraulic system?

    So I should be golden I have auxiliary ports with the capabilities of 17 gpm flow at 3500 psi if the pumps are working at stated specks.
  6. P

    T590 compromised hydraulic system?

    I wonder about running this setup through quick attach hydraulic fittings first preserving the lift curl and planetary drives
  7. P

    T590 compromised hydraulic system?

    How safe do you think that it would be to see what showed up in the hydraulic filters in a 5 or 10 hour test
  8. P

    T590 compromised hydraulic system?

    So I disassembled the motor today there Is some very light scouring both visible and to the touch. So I talked to a service manager for bobcat and he says there are 2 places that the gold color could come from the main gear pump or the two pumps that controll turning these are rotary piston...
  9. P

    T590 compromised hydraulic system?

    So there is some scoring in the old pump very light, visible and to the touch. The score marks are not as deep as a hair.
  10. P

    T590 compromised hydraulic system?

    Well the fan I feel is the start. I’m not seeing any other affects loss of power lifting turning ect and want to be proactive in this situation. I will be taking the fan motor apart didn’t have a chance this weekend power washing painting listing other needs on this machine. I’m trying to find...
  11. P

    T590 compromised hydraulic system?

    so I have replaced the hydraulic cooling fan on my t590 I haven’t started it and don’t plan on it till I do some more research.when I took the oil cooler out and dumped it I found a few more of the gold colored flakes. Crewcheif said they came from the charge pump at what point do you call the...
  12. P

    T 590 overheathooting

    Does anybody know what bobcat charge pump pressures should be
  13. P

    T 590 overheathooting

    So if the flakes come from the charge pump would I be seeing diminished performance on steering/lift lower tilt as well or not necessarily?
  14. P

    T 590 overheathooting

    The fan is fairly hard to spin when the engine is off when I spun it with a wrench it only turned for a short time and it spooled down fairly quickly. the second time it spun an even shorter time. I called bobcat they say there is an up grade pump with new hydraulic lined and a different...
  15. P

    T 590 overheathooting

    Ok so this evening I had a few minutes and if I start the machine and crack the lines there is fluid at the hard lines. I pulled the filter and there appears to be gold colored metal flakes in the oil on the filter. With the machine running I spun the fan and it started spinning at very low Rpms...
  16. P

    T 590 overheathooting

    Ok when the engine is started the fan isn’t turning still haven’t had a chance to straighten out the wires yet but they should be making contact . Thinking about cracking the hyd line to the motor to check if there is any flow at the motor
  17. P

    T 590 overheathooting

    I have a new to me 2013 t590 that is overheating. So far I have taken the radiator out of the machine and the checked to make sure that it isn’t clogged with dirt/mud. I didn’t notice the hydraulic fan come on while it is running. I lifted the cab to check on the fan I see a lot of splices and...
  18. P

    t180 low oil pressure

    1800 give or take
  19. P

    t180 low oil pressure

    No oil in the connection on the oil pressure sender. Ill check the hydro tommorrow. Question on the switch voltage possibility I put a t on the engine oil sender port and put the gauge back in and put a manual gauge on the other port and when the low oil pressure light came on checked the...
  20. P

    t180 low oil pressure

    Where is the hydrostatic charge pressure switch located? The oil pressure sender is getting oil
Top