• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    721

    We have a 621b It had oil leaking like you explained. The problem turned out to be some hoses that were weeping through the sides of the hose. These were under the bucket control and above the floor.
  2. P

    Detroit 40 series

    We have a 40 series Detroit that suddenly started to blow major oil out the breather. It sounds ok and seems to run ok. Any thoughts? Thanks
  3. P

    CA day in the life of a WABO scoopmobile Model HPD

    I bet a bad ECM will not ruin the day with that machine.lol (electronic control module)
  4. P

    Ag Chem Machines?

    Electrolisis effecting what? Cylinder liners?
  5. P

    Ag Chem Machines?

    Gadgetman. How is the Deere sprayer doing? We had a trouble code 26 show up on an 1803. The machine would not move in any gear.(Terra Shift) Ended up being a broke wire in the bulk head terminal fitting next to the transmission. Had to replace the wiring harness going to the trans.
  6. P

    Cat 924g problems

    I am only going from you user name.... Thank you for your service.
  7. P

    Swinger or willmar wrangler wheel loaders

    We were lucky in that a local repair shop happened to have a whole rear end out of the same loader and we just swapped it out. I would think a good drive-line shop should be able to help you out. I will check and see if I can get some part numbers from the local guy. The last time the gears...
  8. P

    What's a 644C worth?

    Look up the machine at machinerytrader.com
  9. P

    Ag Chem Machines?

    Sound like some nice features on you units. What row crop sprayers are you running. I have no paticulair question in mind. Had a flow meter fail today. Replaced and all is well. We are just getting a good start on topdress. Nobody really talking corn yet. About the 10th to the 15th would be...
  10. P

    Ag Chem Machines?

    Ya we liked the A because of the bullet proof rear end. The early terra gators had internal brakes that could cause problems.
  11. P

    Ag Chem Machines?

    Never seen an A with a dump box on. How did you deal with the tapered frame when mounting the box? Stairs on the right side is different too. Turbo 3208?
  12. P

    Ag Chem Machines?

    Any one out there running Ro Gators or Terra Gators for a living?
  13. P

    Swinger or willmar wrangler wheel loaders

    We have an old loader with Dana 60 diff., spider gears stripped twice in 30 years service. not bad I would say. We currently have a Willmar and really like it. I am sure we will invest far more money in the hydraulic system than the old one in 30 years. At least with the swinger you only have...
  14. P

    Case 621B De-Clutch switch

    I would like to make the switch on the top of the joy stick a clutch switch instead of a 1st and 2nd gear changer. How could I make this change?
  15. P

    621B Joy Stick leak

    I am a neewbe on this wheel loader. It weeps oil out of the joy stick spools. I have the parts book and see the "cup seal" and plunger. How do I get to the spools to replace the seal. I took loose the allen head bolts holding the whole unit to the dash but the valve it still attached to the...
  16. P

    Arkansas Farm Pics

    Pretty much the same as NW Ohio
  17. P

    Burning Your Waste Oil In Your Engine???

    would the oil separate in a tank if left alone for a long time?
  18. P

    I said never again but I did buy another Lincoln 18 volt grease gun.

    how long do your batteries last on the 12 volt?
Top