• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. mudober

    Removing large bushings

    So I am quite happy that I have been able to get these two out. After some research I done I have found a way that works for me and I am going to share it with you. I used stainless steel rods to weld around the inside of the bushings twice then welded the angle iron to the bushing. Let it cool...
  2. mudober

    963 Transmission Question

    I find it normal on everyone I ever ran. There just not meant to be idled down and operated that way. I seen a guy smash a light plant once with a 963 he was on a slight slope idled down and it freerolled forward. Best to run it full throttle when trying to inch up on something.
  3. mudober

    953 high-lift purchase

    Guess not. So i will take my chance on a used 953.
  4. mudober

    Loader purchase

    I stay away from the older Deeres because they tend to blow hydraulic lines on the drive motors. They are a very hard pushing machine but I always considered myself lucky to get a week out of one without something happening...
  5. mudober

    Does this qualify as a track loader

    If a rock comes over the bucket your dead. Rubber tire loader much better here. Good thing it never went into production.
  6. mudober

    No one wants to work also They don’t want to pay

    He would get an a-- chewing from me.
  7. mudober

    953 high-lift purchase

    I recently sold my 955L it was a very good machine just a little slow. I'm wanting to buy a 953 to replace it with. I have a lot of light brush to clear, mostly Ota Molaves that grow like weeds here. My budget is 20 to 35K. I'm a competent mechanic and operator. I'm a little apprehensive as I...
  8. mudober

    New Holland B95C update

    Just wanted to update you all on my problem. My backhoe would crank for almost 3 seconds before starting. I fixed fuel leak didn’t help,cleaned fuel rail pressure valve didn’t help. So took it to shop. They put it on computer and found a bad camshaft sensor replaced that and the wiring harness...
  9. mudober

    955L Bushing

    Yes that is the right one. Thank you for your help.
  10. mudober

    Cat 963c problems help

    holy crap Ill stick to my old 955L
  11. mudober

    955L Bushing

    perfect thank you Nige. got them aftermarket ordered for $72. both sides.Now if I can get help with one more thing Ill have her ready to push bushes. I have a small leak. It is at the bottom and very frount right corner of the hydraulic tank .It is the fitting for the bucket level kick out line...
  12. mudober

    955L Bushing

    Tried that already cant seem to get the bit thru. So i was thinking if I got to take it apart I might as well put in a new bushing.
  13. mudober

    955L Bushing

    I have a 13X774 my frount right loader arm to bucket bushing wont take grease for nothing . I think the bushing has turned in the loader arm. Can't find part no. for new bushing. Anyone know the bushing no.? I have the pin that is retained by a bolt thru it and grease zirk is thru the loader arm.
  14. mudober

    1998 590sl

    I bought a newer backhoe so I’m selling the ole case. It’s on machinerytrader.com. It’s a very good dependable machine. 5450 hrs
  15. mudober

    Conexpo 2023

    Me and my wife will be going first time ever. Bellagio motel booked 1618 miles to drive.
  16. mudober

    New Holland B95C

    Hello friends, I have a new to me machine I just bought. It is a 2012 model. I have fixed two small fuel line leaks but I still feel like it is cranking over longer than usual to start. So I am wondering what other people with the same machine are experiencing with their start up cold and hot...
  17. mudober

    1998 Hitachi EX200-5 travel speed

    I see it now it was down in the leaves. I got it from here thank you! Dave
  18. mudober

    1998 Hitachi EX200-5 travel speed

    Good picture Thank you I’ll look into it.
  19. mudober

    1998 Hitachi EX200-5 travel speed

    Thanks
  20. mudober

    1998 Hitachi EX200-5 travel speed

    I may have to just put a test light on it till one goes on and off with the switch if o one knows for shure. Hard to do by myself.
Top