• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Fiat Allis 10c Dozer Serial Number Location

    We have one, front idler bearing is out, getting ready to tackle that, concerned about the track adjusters, heard horror stories of them exploding. Been able to locate minor parts, but pricey.
  2. S

    Has anyone rebuilt a JD 450C Transmission/final drives?

    I have an early 450C. Farm use only. Over the years, I've replaced many parts, injection pump, clutch, hydraulic pump/valve, tracks, rebuilt blade, etc. Runs great, but it has reached a point, where adjusting the clutch/ transmission is not doing any good. The trans is tired. With a service...
  3. S

    It Runs!1982 IH Paystar Dump

    We have been building ponds on the farm for years with various equipment. Ye old standby was a 1964 IH R200 Gas single axle dump.Hundreds if not thousands of loads. It sucks. Had my eye out for years for a bigger better dump, Diesel, and Tandem. Found the Paystar at an auction, no title, did...
  4. S

    Where to find old equipment in Pennsylvania.......??

    Im just a few miles from Clarks, our farm seems to be attracting more iron than it needs, but nothing is sacred!
  5. S

    New Holland LX 985 Seat switch

    Installing a new seat, has anyone bypassed the dash power switch in the seat with a toggle? Thanks!
  6. S

    Wanted, double 3/4 cable block

    North of Pittsburgh, rent or buy. Moving a barn center 8"s back on top the wall, need some more parts to my line!!
  7. S

    Need Bobcat 331 final drive parts

    PM sent, replied, phone call, shipment made, parts installed, running again!!! Boys, finaldrive knows his final drives!! Thank you, Sir!! I'm a little worried about the fly by night mechanic,(me) that did the swap, but the parts were exact replacements for the failed ones, not bad for the...
  8. S

    Need Bobcat 331 final drive parts

    pm sent,
  9. S

    Need Bobcat 331 final drive parts

    1996 model, serial 512911199,part number6660675 I bought Bobcat so I could get parts- wrong. Bopcat has no internals, wants to sell me not one $4000 final to replace BUT TWO of them!! Why? They dunno, book says replace both. Found a company in Texas claimed to have parts for retired...
  10. S

    Fiat Allis 250 Exacavator

    Looking at a mid 90s 250. Didnt even know, FA had an Ex line, even if it was built by Hitachi. 6500 hours, machine looks like it was taken care of in the pics, going to see it/run it tomorrow. Anyone know what the pumps pressures should be at? Thanks!
  11. S

    Whats the craziest thing you have dug up?

    Nothing to exciting, beer and whiskey bottles....lit a gas contaminated pit on fire the other day, scared the trucks I was loading.. WHUMP!! lol
  12. S

    Fiat Allis 10 c need a roller

    Havent got that far yet, maybe will look into adapting easier to find parts.
  13. S

    Fiat Allis 10 c need a roller

    Hi guys, Picked up this relic, runs great, tracks are in various stages of replacement, but overall, good shape. One bottom roller is completely destroyed. Looking for a used roller, or a whole parts machine with decent track frames. Seems to be a strong pusher, weird transmission gear...
  14. S

    House Demolition - Aussie style

    How wide are you allowed to haul on the roads down there?
  15. S

    Oliver, the other green tractor!

    Dad bought a new Oliver-Fiat 1265 in 1973. With a 6foot Woods brush hog. still have both. Fuel efficient and reliable. 6 speed double neutral tranny and 2 stage clutch are"quirky" though.
  16. S

    House Demolition - Aussie style

    Re-locatable-- hehehe, translated, modular, trailer house, or mobile home in the states, lol:)
  17. S

    Project: American Crane/dragline 300 series

    I never heard of an Insley until you posted Rick, good luck!! Interested in the Cedar Lake machine, email sent. Maybe we can look at it before Laporte show.
  18. S

    Project: American Crane/dragline 300 series

    Lost to the weeds...or trees, like the 3 sections of boom I looked at yesterday were lost to! Not only were the trees growing through them, but were working on growing around the crossbars. They belonged to a 300 series truck crane in a local boneyard. The owner said he had flipped it over...
  19. S

    Project: American Crane/dragline 300 series

    Yes, the fairlead is on, can't see it in that picture though. And it did come with a clam, I have no intentions of using it, though. I can't find many pictures in the states, neither. Here is a bunch of pictures I found yesterday on a for sale machine...
  20. S

    Project: American Crane/dragline 300 series

    Learned some more: The 3/4 lagging for the drag is American part number F-9818. 13" in diamater and 11-1/8" wide. With 60 feet of boom, it calls for: 88' of 3/4 cable on the drag. 137' of 5/8" cable on the hoist. 415' of 1/2" cable on the boom hoist, unless pendants are used...
Top