• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. trouble007

    new shop ideas/layout

    your right wood working should be far away. we changed the plan and are now just looking at fixing the old 25 by 37 shop and not doing the woodworking.
  2. trouble007

    new shop ideas/layout

    sorry didn't notice your post till know still fighting to get out of the planning stage looks like its gonna be another winter in the cold :( maybe i will get started on the shop when it quiets down in November and damn i wish i had the shop that your describing.
  3. trouble007

    Repairing Bobcat 773

    thanks for the info i will let you know how it turns out. and me reliable? far from it :D
  4. trouble007

    Repairing Bobcat 773

    holy cow that was fast thanks atco, it has one big bolt so does this mean that i dont have to pull the whole axle? just undo the one bolt then replace the seal. how would i be able to tell if the bearing is the problem should it be obvious? if one fails do they all follow? and as a proud...
  5. trouble007

    Repairing Bobcat 773

    Hi, atco i have a 753 the oldest version and there appears to be oil lying in the right front wheel. It appears as though its coming from inside the Axel shaft would this be a blown seal? thanks Ryan
  6. trouble007

    Confession is good for the soul...

    my boss was going around a tight s bend corner on of the main roads here with a load of horse stalls lying on a hay wagon not strapped down and i guess he took the corner a little too fast well 3 of the 300 # plus horse stalls went flying off the wagon thankfully one of my co workers was tailing...
  7. trouble007

    painting logos

    well its done. theres a picture attached the first is of the template i made for the logo and the second is the complete project in all there was 3 coats of yellow then it was taped and stenciled then cut then 3 coated of JD green and in a couple of months when its good and cured im going to put...
  8. trouble007

    Operating a skid steer

    practice, i have been running a skid on a farm ever weekend and summer for the past two years and i find that the more seat time you have the better you get. as for not seeing i prefer the braille method :D and eventually you get a better feel for where your bucket should be.
  9. trouble007

    growling noise in a turn

    we have a 753 and when at idle we here a grinding too and ours works fine so i would have to assume that its relatively normal
  10. trouble007

    Versatile 500

    yes a small cummins is what it has it is a large articulating tractor so its really not needed we just got a good deal on it when we were buying a different tractor from the same person and thanks for the idea i will check all the fuel lines we have been busy with hay lately but i might be able...
  11. trouble007

    Versatile 500

    bump
  12. trouble007

    New Holland Quick Connects Stuck

    spray some penatrating oil around the ends then as bill on the hill said hit the ends with a hammer. sometimes if you are gentle you can put a long piece of pipe on them and see if they will move. i have had sucess with both ways. good luck Ryan
  13. trouble007

    763 bobcat valve lock problem

    try cleaning out the fuses depending on which model you have they are either on the right hand side when you open the back door or between your feet.
  14. trouble007

    Versatile 500

    we have a Versatile 500 and we are having troubles starting it i have been working for this guy for 2 years and havent seen it running once. the batteries are good it seems to turn over normal the only problem is it wont start. im not that farmiliar with the Versatile tractors so i was wondering...
  15. trouble007

    painting logos

    cool idea CPS i never really thought of that maybe i will o well i will be sure to get some pictures of it up when im done i just primed it today. tomorrow im going to get the JD paint so it should be done by the end of the weekend i hope
  16. trouble007

    painting logos

    that will work i asked a graphic designer that i know if he had any vinyl and he thinks he does so i might just have to cut it out myself thanks for all the relpies and ideas i will let you know how it turns out.
  17. trouble007

    painting logos

    i know this probably isn't the best place for this question but there seem to be allot of smart minds on this forums. So maybe someone could offer some help. i have a large rolling tool chest 5' by 26" on the front. I'm looking to paint the john Deere logo on the front which is large and flat...
  18. trouble007

    Purchased Deere CT332

    if your welding the frame just remember to unhook the battery. i have cooked a few expensive batteries that way
  19. trouble007

    Case 1845c bobcat bogging down problem need help

    when you say you checked the fuel line did u replace the filter too? sometimes it gets plugged.
  20. trouble007

    T250 hydraulic problem

    that sounds logical
Top