• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    D5n hyd problem

    d5n agg02705 had few brass flakes in hyd oil and found what looked to be a price of brass slipper off piston. Drained pulled pump and dissamble wasn't from this pump. I think possible from previous. Cleaned tank lines cylinders were leaking cleaned and repacked. Pump was worn so installed new...
  2. S

    Older cat excavator.

    I have cat et and comm adaptor 3 with 9 pin and 7 pin cabels. I need to find the pt number to hook the comm adaptor to the cat b series. Thanks for the help.
  3. S

    work pics

    Here is a few things ive been into lately. This is a radial piston pump off a john deere tractor
  4. S

    Homemade drill drive boring bars

    Here are a few pictures of some bars ive made out of 1045 crome shaft with 1/2" threaded tool ports.
  5. S

    Did i have to much time on my hands

    Here is a tool i made to adjust screw and lock on cat rocker arms when adjusting valves. It would be very easy to make this tool with a variable torque setting with loaded detents lik preset torque limiters for shafts. It wouldnt change the size could i sell them.
  6. S

    Acessing moniters for calibration mode.

    I usally work on older cat excavators with tan and greay moniters like 318bl The code is oe323a for acess. The cat dealer here tells me that d on up that i cant acess without a laptop. Is this correct Thanks Steve
  7. S

    Fabrication of thumb stick bracket and stiff arm

    Here are a few pictures of a thumb i had but was missing the stiff arm and stick mounting bracket thanks Steve
  8. S

    d11n

    rest of pics Thanks for looking Steve
  9. S

    d11n Repair

    Maby in the wrong place but this d11n roller frame repair was something you might want to see. Hole size is 10.342 it took 2 passes of weld for buildup,
  10. S

    D6r Hardbar and dozer frame repair

    heres a hardbar that was eggshaped 5/8 both ways. hand buildup 7018 and linebored and cut snap ring grooves back in. the dozer frame is 4140 the frame has no bushings in them i order 2 extra ones for the bar and bore the frame for them. cat pulls the engine or pulls the pan to bore the center...
  11. S

    lineboring

    992d
  12. S

    lineboring labounty shear on excavator

    lineboring 8.750 hole 5 inches thick on labounty shear other pics are a 992d 7 inch bores.
  13. S

    992d

    heres a 92 im working on welding and boring. pins are 7 inch dia. holes were egg shaped about 3/4 inch
  14. S

    Bore repair

    This is a 8.750 hole i just bored on a labounty shear just thought you might like to see
Top