• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. A

    Koehrings in the bush

    missed one
  2. A

    Koehrings in the bush

    some more
  3. A

    Koehrings in the bush

    how about this
  4. A

    Koehrings in the bush

    Cutting a block near Boisetown, stopped today and took some pics of the Koehring they have on display, post them as soon as i figure out how
  5. A

    748 G111 Internal Leak

    We have 3 H's, operators love them, very strong, although weve had a few problems, had to change the pump on one
  6. A

    748 G111 Internal Leak

    A lot of it I would like to forget
  7. A

    748 G111 Internal Leak

    We have 9 jd skidders right now,3 less than 6 months old, the new ones have gone back to no diff lock pump,using tranny pressure for diff locks, they claim no chance of cross contamination in the event of a failure but time will tell.That hose should be made of suction line, i made one from...
  8. A

    748 G111 Internal Leak

    Yeah, your right I was confusing park brake and service brake, park works off tranny oil.Yes, that would be one place it could leak between those pumps, especially with the machine not running as the higher hyd. tank would want to drain into the front diff, if you take that tandem pump off check...
  9. A

    748 G111 Internal Leak

    Diff locks on g3's are self contained using the front diff as a resevoir, the only one i've seen overfill the front end it was brake seals.An internal crack in the park brake/diff lock block under the rear left corner of cab could put park brake oil(tank oil)into the front axle,I can't think of...
  10. A

    Issues with Denarco DT 3500

    On our machine it was the holding arms that were sticking, operator had to tap the top saw, butt saw or snap the front arms open to get the rear arms to release,I think it had more to do with spiking the pressures than trying any particular function,I switched valves back to front and within 2...
  11. A

    Issues with Denarco DT 3500

    Sorry, was at our machine today, it was the cartridge directly opposite the knife arm hose ports, sun part code CKGB XCN, It's a load holding pilot op. check valve it's supposed to hold your arms from creeping open under load but if it sticks it they won't open at all.
  12. A

    Issues with Denarco DT 3500

    If your machine is the same as ours and has a butt saw, the 2 hyd. blocks are identical, except the one in the head is alum. the rear one is steel.There is a Sun check valve cartridge near the 2 ports for your knife arm hoses, switch it for the one in the back and see if your trouble goes to...
  13. A

    Help with deere 160 please

    Hi, first post here, had to chime in when I read your post.Did you put a manual guage on and check oil pressure? Reason I ask, couple years back, JD grapple skidder operator reports oil light on,engine shutdown.All I had was a 0-5000psi guage so, like you, I pulled turbo feed line off and had...
Top