• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Bobcat 743B Diesel

    I can't tell you where it is on the 743, but on a 763 it's just below the seat behind a stamped sheet metal cover held in place by two bolts. It's kind of a bulb shaped blister, as you get in the machine look down at the verticle section just below the seat. If it's the same as mine you'll find...
  2. S

    Bobcat 743B Diesel

    Have you check the fuse panel for blown fuses?
  3. S

    Bobcat 763 controller cooked!

    Anyone deal with this before? I have a 2002 bobcat 763 High flow. I loaned it to a friend of mine and I guess it was running fine he shut it down, came back three days later and it was dead. He check the battery and it was fine. The long and the short of it is that it is burning the "computer...
  4. S

    Scat Trak

    Scat track excavtors Scat track was a Cessna company, when Cessna got in financial trouble they sold off the skid steer line to Volvo. As the excavators were (and still are built in Italy by Libra) the excavator line was not Scat Tracks to sell. Vermeer then took over distribution in the US...
  5. S

    Hydraulic Problem With Pilot Controls

    Yes it does, it has a Nachi PVD-1B-29P-9G-4690F. With a gear pump (maybe that's the 9G designation?) hanging off the back. The schematic shows a pilot line from each discharge port on the piston pump tied to the gear pump with what appears to be a counter balance valve or something. I guess...
  6. S

    Hydraulic Problem With Pilot Controls

    Hmm were to start. The issues started with my machine some months back, Anyway the way it started was on ocassion the machine's functions would begin to slow down. If I raised the blade it would clear it up. I can't remember for sure but it seems like it would clear up as I began to raise the...
  7. S

    Hydraulic Problem With Pilot Controls

    Thanks guys, I thought the gear pump was probably a charge pump also. The stange thing is, it is plumbed into the control valve on The end I believe. The 2 ports on the piston pump are set up to feed the center and the opposite end. I didn't see any plumbing that even feeds charge pressure to...
  8. S

    While driving to day,

    Pretty neet deal, we are starting to see wind generators here in San diego also. The lattice jib configuration in the pictures is called a luffing jib. The main boom is telescoped out to a given length and left alone. Then the operator booms the crane up to a predetermined boom angle typically...
  9. S

    Hydraulic Problem With Pilot Controls

    Scat track pilot issues I have a scat track 224s, I'm having simialr issues. I did find out the the machines are still being produce in Italy as Libra units and that the Vermeer factory can and will still get parts for them. I just got the Hyd. schematic for mine today and have begun sorting...
Top