• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Help Troubleshooting a Bobcat S70

    Hey guys I have a similar problem with my bobcat S70, when I turn on ignition I hear a click from the starter but it will not crank, I have changed the battery, ignition key switch and the had the starter reconditioned it is still the same, I have checked the ignition wire coming into the...
  2. M

    reset error codes on a bobcat s150 skid steer

    Hi everyone hope your all doing well, was wondering if anyone knows or can advise me is there is a way to reset error codes on a 2008 bobcat s150 skid steer with a keyless panel? Whether it’s something you can do yourself or you need a dealer to do it? Thanking you in advance really Appreciate...
  3. M

    Bobcat 463 drive belt idler pulley replacement

    Hey guys appreciate your assistance, my bobcat idler pulley is rattling away & I think my drive belt also needs replacing there isn’t much space between the chassis & the pulley I can’t remove the old belt does anyone know if you can change the belt & idler pulley without removing pulleys or a...
  4. M

    Bobcat 763 Hydraulic control valve (?) leak

    Hey Willie, Crewchief, Following up my previous post, the hydraulic drive motors were leaking the hydraulic oil into the chaincase compartment which was absolutely full to the rim so when it was parked at a slight angle it wast leaking from the little plastic breather plug which is located...
  5. M

    Bobcat 763 Hydraulic control valve (?) leak

    After checking around the valve some more, I noticed that it is leaking from a small hole with a plastic plug maybe like a breather that pushes into a hole which is located directly under the valve near the front, could be a a breather for the chamber where the drive chains are located? Also...
  6. M

    Bobcat 763 Hydraulic control valve (?) leak

    Hi Willie hope you been well, i need a little bit of advice, i just recently purchased a bobcat S100, before i used it checked the lubricants & noticed the hydraulic oil was low added close to 3 gallons & noticed a substantial oil leak coming from the underside of the main hydraulic control...
  7. M

    Bobcat S130 Lift Cylinder Removal

    Hi everyone i have a leaking lift cylinder on right side on a S130 bobcat, hydraulic shop wants me to take cylinder off the machine & take it to them for repairs, the rear pin on the cylindeer looks like it may be difficult to remove as there is no access to it to tap it out from the inside...
  8. M

    2007 Bobcat S150 With Delux Instrument Panel Fuel Shut Off Solenoid Issues

    Hi Willie as mentioned earlier I pulled the solenoid off made sure it wasnt seized or worn out, I checked all the wiring made sure it wasnt rubbing or damaged, lubricated the plug with WD40 7 put it back together, today it worked all day without missing a beat so hopefully it was just a bad...
  9. M

    2007 Bobcat S150 With Delux Instrument Panel Fuel Shut Off Solenoid Issues

    Good Morning Gentlemen, Been awhile since I posted anything but having an issue with my bobcat S150 skidsteer loader, worked it a for a few hours today all seemed ok but then it kept on beeping 3 times & turning itself off, when I checked with the codes kept on saying that there was error with...
  10. M

    BobCat ACS error

    Hi Everyone hope you are all well, can anyone advise me on how you operate the auxiliary hydraulics on attachments that connect to the flat face hydraulic couplers which are original equipment on a bobcat 463? there doesnt seem to be any additional switches or buttons on the levers is...
  11. M

    Error Code 21-02 BobCat 425 Mini Excavator

    hi partsman & crewchief & thank u both for your advice I tried changing the relay, I even swapped them over with a couple of the other relays that were the same in the fuse bank but the issue still remains, when ignition is turned on the timer does not seem to come on the instrument gauge that...
  12. M

    Error Code 21-02 BobCat 425 Mini Excavator

    Hi Partsman & thank you for your post can u please tell me where this relay is located & whether it requires replacing or maybe just clean up the contacts? many thanx frank
  13. M

    Error Code 21-02 BobCat 425 Mini Excavator

    Hi everyone hope that u have all been well I have another issue with my my bobcat 425 excavator it is coming up with this error code 21-02 which is 2102 Glow Plug Error On anyone have any advise on how I can over come & fix this issue? thanking u all in advance for any assistance u may be able...
  14. M

    Error Code 33-23 BobCat 425 Mini Excavator

    Hey Crewchief I have pulled the controller off loosened all the plugs sprayed wd40 blew them out with with air compressor & I still have the issue with the error code 33-23 I think I have pulled off ever plug I could find on the machine is there anything further u would suggest before I call the...
  15. M

    Error Code 33-23 BobCat 425 Mini Excavator

    Hey Crewchieff, I unplugged sprayed WD40 & replugged most of the connectors inside the engine bay & under the floor it is still doing the same thing, the error code says the main controller is not caliberated how ever everything seems to work fine,any ideas where the main controller is located...
  16. M

    Genie Scissor Lift will Not Lift

    Hey Willie I followed your instructions & everything works like a charm, the pump pressure was good & within tolerances so I opened up the relief valve 1 full turn & changed the hydraulic filter as well & it worked flawlessly afterwards thanx again for your assistance, best wishes frank
  17. M

    Genie Scissor Lift will Not Lift

    THanx alot Willie I really appreciate very much looks like u went to a fair bit of trouble, I will have a play with it in the morning I noticed that is a hydraulic filter in there I am going to change that as well just in case it is blocked & may be restricting hydraulic flow will let u guys...
  18. M

    Genie Scissor Lift will Not Lift

    Hi Williethanx for your prompt response the serial number is # gs30007b-86999 t
  19. M

    Error Code 33-23 BobCat 425 Mini Excavator

    Hey guys wondering if anyone has some advice for me I Have 2007 Bobcat 425 Mini Excavator after giving it a thorough clean witha a gerni pressure washer it has now come up with an error code fo 43-23 which means main controller not caliberated everything seems to work ok but this is pissing me...
  20. M

    Genie Scissor Lift will Not Lift

    Hey guys wondering if anyone has some advice for me I Have 2008 Genie Gs 1930 scissor Lift, when a single person is operating the lift it goes up & down fine but when 2 average size persons are in the lift it will not go up we are well under the rated maximum capacity of the lift platform u...
Top