• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

2012 Volvo ECR88 Blow By??

Andyba20

Member
Joined
Feb 1, 2013
Messages
5
Location
TN
Guys,

Posting for my brother who is looking at an 88 with 2200 hours. D3.4 motor. With motor running and oil cap off there was what looked like blow by, but when you look down in the oil reservoir under the cap there are gears moving. Is this blow by, or just oil splattering caused by these gears. I may be using the wrong nomenclature, but hopefully that gives you an idea of what we're seeing. Does anybody who runs this machine know If this is normal.
 

uffex

Senior Member
Joined
Jan 23, 2012
Messages
4,464
Location
Lincoln UK
Occupation
Admin
Good day Andyba20
If the engine is not burning excessive oil it would suggest that all is well.
Kind regards
Uffex
 

Andyba20

Member
Joined
Feb 1, 2013
Messages
5
Location
TN
Hey Uffex thanks for the reply! I'll ask the owner if it's burning any oil and hopefully he'll be honest about it. Is there any value in doing a compression test?
 

uffex

Senior Member
Joined
Jan 23, 2012
Messages
4,464
Location
Lincoln UK
Occupation
Admin
Good day
If a compression test would make you feel more comfortable with the machine then I suggest it may be a good thing however when a engine begins to give crank case compression it normally will be accompanied by smoke from the stack and lower power than normal as well as leakage from gaskets.
Have a good day
uffex
 
Top