dennis sanders
Well-Known Member
Feel stupid but where is the fuel filter located on a D4h2Catapillar. ...and does it have a manual lift pump to bleed air out of the filter.
Serial#8PBO42858F2044
Serial#8PBO42858F2044
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Fuel filter location ...D4h2Catapillar
- Thread starter dennis sanders
- Start date
kshansen
Senior Member
- Joined
- Mar 11, 2012
- Messages
- 11,165
- Location
- Central New York, USA
- Occupation
- Retired Mechanic in Stone Quarry
Not sure why I'm having trouble with the S/N in SIS, but I think this may give you some hints:
Note that it says some do and some don't have the priming pumps.
Note that it says some do and some don't have the priming pumps.
dennis sanders
Well-Known Member
Im not sure where the filter is located.....that is the serial number....i may have read it wrong......8PBO4285
Engine serial
45V90658#7E2301
Engine serial
45V90658#7E2301
kshansen
Senior Member
- Joined
- Mar 11, 2012
- Messages
- 11,165
- Location
- Central New York, USA
- Occupation
- Retired Mechanic in Stone Quarry
Did you open that file I included in my first reply?
Just on a wild guess I made a slight change to the S/N you posted, 8PB04285 seems I was cheating and using copy and past on my computer. In case you do not see the difference the "0" after the B is a zero not an "O". Computers can be so fussy about little things like that!
Now SIS recognizes the S?N and shows it as:
D4H TRACK-TYPE TRACTOR
Machine Serial Number - 8PB04285 (Build Date - 11/05/1990)
With a list as long as my arm of the various arrangements used to make it.
It does look like this machine has the basic spin on secondary fuel filter and the screen type primary strainer like many other Cat machines. Does not seem to be equipped wit a hand priming pump as it has a block off plate on the primary fuel filter head where the hand priming pump would be mounted. If there is room and access in that area I'm guessing one could be installed.
Last edited: