• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by tightgtp

  1. T

    case 1830 electrical schematic

    I never did. Funny thing is, I don't even remember why I needed it.
  2. T

    ls 170

    you'll have to adjust the levers that attach to the brake shafts that come out chain cases. loosen the 1/4 bolt on the lever and slide it off and turn the brake shaft the direction the brake lever is applied. the brake shaft is splined. lift up the seat to do it. its tight but can be done.
  3. T

    Case 75xt experts

    well i had a pretty good idea that i was losing charge pressure before i started but giving the prior maintance of this customer's machines before i took over i'm not suprised the pumps were bad. i'm recommending the motors be replaced as well
  4. T

    Case 75xt experts

    i already sent the pump out for repair. just waiting on word from the local case dealer about the motors. they are on backorder no promise date yet
  5. T

    Case 75xt experts

    yes i capped the the high pressure ports. the pump that drives the right side holds charger pressure and pulls the engine rpm's down when stroked. the pump that drives the left side drops all charges pressure and never pulls the engine down.
  6. T

    Case 75xt experts

    finally got back to it yesterday. capped of the hydro pump, and i'm dumping charge psi on the rear pump. time for new
  7. T

    420 Case?

    not sure if you bought a skid steer yet but for what it's worth i'm actually impressed with the 420 i've worked on new hollands all my life and the 05 and 06 420's i've worked on has the shibura engine same as new hollands. very reliable engine, i have a customer that uses that new holland's in...
  8. T

    LS 170 new holland

    sounds to me like a bad ground or weak battery. don't overlook the easy stuff
  9. T

    case 1845c intermittent full throttle

    no not really it seams to burn pretty clean. it runs good and smooth at idle or full
  10. T

    case 1845c intermittent full throttle

    yeah i've tried that. once i did all my previos testing i was pretty certain the pump is to blame
  11. T

    case 1845c intermittent full throttle

    assuming its still the original motor and hasn't been rebuilt its around 12,500hrs.
  12. T

    case 1845c intermittent full throttle

    i have a customer with a case 1845c. i have trouble getting full throttle out of it. i have adjusted the throttle stops but no help. evey now and then it will go to full throttle. i'm suspecting the injection pump. it has new fuel filters and air filters. i did check lift pump pressure and i...
  13. T

    solid tires/ foam tires

    for what it's worth stay away from solid tires. i have a customer that runs them due to the environment, also run on blacktop all day. i have seen most of their machines frames cracking around the axle housing. one machine has had both chain cases outer frames completely broken out.
  14. T

    Case 75xt experts

    unfortunetly i don't have a service manual. thats the first think i was thinking was i was losing charge psi. i'll have to look into testing it
  15. T

    Case 75xt experts

    i haven't heard any weird noises. hyd. oil seems to stay clear. i've only been servicing the equipment for the past year. i'm not sure of the maintenance prior to me, but i would say it hasn't been the best. an oil leak went unreported for a couple of months and the operator was using a 46w hyd...
See more
Top