• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by sdc23_99

  1. S

    Service Manual For Hitach EX60LCK-3

    From what i understand the ex-60 is same as jd 190e other than engine. I downloaded a manual for my jd online for like $30, they also have them on ebay.
  2. S

    Hydraulics on my deere 190e are jumpy?

    Thanks for the replies, I'm gonna check and tighten the hoseclamps going to the pump inlet side today and will see if that solves the problem. I used the machine for a couple hours yesterday, it only happened a couple times and fixed itself after cycling the hydraulic cylinders?
  3. S

    Hydraulics on my deere 190e are jumpy?

    I recently purchased a 96 190e with about 6000hrs on it. I was operating it the other week and noticed when I was tracking it started lurching forward a bit, not as smooth as it had been running. I stoped operating, examined the machine and found that one small hose going from valve under center...
  4. S

    JD 190e

    I have seen the tech manuals on ebay and found that heavyquip has undercarriage parts for a small fraction of the cost of local JD dealer for my deere 190e. (top roller was $60+shipping compared to $360)
  5. S

    Welcome!!!

    Name is Seth, worked with equipment, mostly excavators for about 10 yrs. I lack experience with trouble shooting and repair on heavy equipment and hope to use this website and the knowledgable members as a reference.
  6. S

    Hi Gang

    I'm glad we have some very experienced members to help out the less experienced like myself!!!
  7. S

    How Did You Find Us?

    I found this site searching for excavator forums on yahoo, great forum
See more
Top