• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Ross0133

  1. R

    Service Manual Trading Post

    Anyone have a Service Manual for a John Deere 410L backhoe?
  2. R

    Case TV380 Intermittently Throws Code 4754

    The machine had around 950 hours on it. I had not been around it all its life to know what kind of matinence schedule it had recieved.
  3. R

    Case TV380 Intermittently Throws Code 4754

    On that machine I took off my hydraulic filters and found a lot of bronze looking metal indicating a bad hydrostat pump
  4. R

    Cat 289D Bucket Inclinometer Calibration

    I replaced the bucket inclinometer sensor on the RH side of the coupler plate at the bucket and yes I am 100% sure it is Code 3700-13
  5. R

    Cat 289D Bucket Inclinometer Calibration

    Ok thank you
  6. R

    Cat 289D Bucket Inclinometer Calibration

    I have a Cat 289D with Self Leveling Bucket. It came up with a Bucket Inclinometer sensor high voltage and code 3700-13 Bucket Inclinometer sensor out of calibration. I fixed the High Voltage code by splicing all 3 of the wires that go to the sensor back together but I still had the Calibration...
  7. R

    John Deere CT322 Wont Start

    I will check that out tomorrow thank you
  8. R

    John Deere CT322 Wont Start

    S/N is 144860. Thanks for your help so far.
  9. R

    John Deere CT322 Wont Start

    I am working on a John Deere CT322 that wont start. I am not getting power to the fuel shut off solenoid but checked the fuses inside the cab and they were all good. I'm wondering if there is a relay that could be bad but I have no way of knowing what each of the relays that are under the cab...
  10. R

    Equipment for selectively clearing/rough grading 10 acres?

    I agree, a crawler loader seems like it would be the most ideal machine for the variety of work that you are wanting to do. There are a few listed for sale at www.daporebros.com if you wanted to check some out.
  11. R

    Cat 259D Backup Camera Not Working

    Did you ever figure out this issue? I have a 259D3 that is doing the same thing.
  12. R

    Cat 308E2CR Hydraulic schematic.

    It ended up being in the pattern control valve Thank You all for your help
  13. R

    Cat 308E2CR Hydraulic schematic.

    So I don’t know why I typed that it was the right hand joystick. I absolutely meant the left hand joystick when sitting in the seat. Sorry for any confusion that may cause. The machine is new to me.
  14. R

    Cat 308E2CR Hydraulic schematic.

    Basically what my issue is to move the stick you have to move the joystick from side to side or to 9 o’clock or 3 o’clock and to move the turn table you move forward and backward or 12 o’clock and 6 o’clock so I am going to use this to see which hoses I need to switch
  15. R

    Cat 308E2CR Hydraulic schematic.

    Thank you
See more
Top