• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by PineTreeAssassin

  1. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    After a solid year of running since the code first showed itself. It’s back again. Unfortunately this time it’s here to stay until we can find it. Oddly enough, the machine will run fine after about noon. Almost like it’s expanding some from the heat or something. Have not pulled back the wiring...
  2. PineTreeAssassin

    700J dozer cab conversion… Will it work?

    Looking at purchasing a complete cab off of a salvage 700J for for my open station 700J. Curious to know what all is is needed to complete the swap. Ac compressor,bracket, Maybe different wiring harness? Any insight on this would be greatly appreciated. Thanks!
  3. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    No codes since yesterday. Not going to stir up a hornets nest. But definitely plan to check pin connections once we get done with this job. Thanks again for the quick responses fellow.
  4. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    Can’t thank you guys enough for all the help. Headed out to the job this morning and see what happens. Really appreciate y’all sharing your wealth of knowledge with me. Will update y’all ASAP. Thanks
  5. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    Thanks again for the quick responses. Battery connections and ground are clean. Looking like a problem in harness area
  6. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    So went back and pulled on wiring harness inside battery compartment. Strangely enough it never threw the code and ran fine for 30 mins.. If throws it again in the morning will try to isolate the problem area better for you guys in that harness area
  7. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    Gonna look over everything again one more time just to be sure. Could it possibly be the PWM Valve sticking ?
  8. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    Thanks buddy!
  9. PineTreeAssassin

    2011 Volvo ec210c Hydraulic failure code

    My 2011 Volvo 210c excavator is throwing a hydraulic failure code - PWM9101-05. Causes machine to track unevenly and very low power. Was told this could be a voltage issue. Any help or insight is appreciated. Have checked all battery connections, cleaned, and tighten back up. Batteries are less...
  10. PineTreeAssassin

    volvo ec160b lc monitor (info unit) not working

    I ordered one, and also sent mine back to an industrial electronic repair shop. Hopefully have one back shortly. I paid 450.00 for mine. Comes pre programmed. Glad to hear your’s worked for you!!
  11. PineTreeAssassin

    volvo ec160b lc monitor (info unit) not working

    Just finished trying that, no luck. I just ordered a programmed monitor. Gonna send mine off to be repaired to hopefully have a backup. Downtime has killed me over this one
  12. PineTreeAssassin

    volvo ec160b lc monitor (info unit) not working

    It appears to have shorted on one of the pins. And on the circuit board itself
  13. PineTreeAssassin

    volvo ec160b lc monitor (info unit) not working

    those were my first thoughts.. Leaning towards aftermarket now. Will keep you guys updated on it.
  14. PineTreeAssassin

    volvo ec160b lc monitor (info unit) not working

    If I could find one off a salvage machine, would it be ready to go, or would it have to be programmed?
  15. PineTreeAssassin

    volvo ec160b lc monitor (info unit) not working

    Unfortunately it’s just part of it. Louisiana humidity can be tough on electronics. I’ve found some online, and the Volvo service guys have told me that their customers have bought them as well with no issues. Trying to see if I can find one pre-programmed. Thanks for all your help man.
Top