• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Outlander

  1. O

    JLG 600AJ Deutz Year 2000

    Hi, Have been busy with the machine. Please take a look at photos below. They are pictures of the only clutch I can find mounted with the actuator. . I really dont see any possibility to have three modes of operation. Once engaged with the clutch actuator is fixed to throttle lever...
  2. O

    JLG 600AJ Deutz Year 2000

    Hi Willie, I fully agree with your thoughts. It would be reasonable machine working this way. The only problem is that the only clutch I can see between actuator and throttle lever is enabling fixed coupling between them. Once manually coupled (clutched) there is no possibility for both to...
  3. O

    JLG 600AJ Deutz Year 2000

    Hi Willie, Please take a look at the picture. Actuator is coupled with the throttle lever. When in retracted position, throttle lever is in low position and is limited by the screw. With this screw marked as "Throttle lever adjustment" I can adjust RPM's. But those are lowest possible...
  4. O

    JLG 600AJ Deutz Year 2000

    Thanks again. As you explained this I agree completely with your thoughts. However on the machine situation is a little bit different. I can see that when engine is started and no control switch is used, there is no voltage on red wire (and white as well). Once any control switch is pushed...
  5. O

    JLG 600AJ Deutz Year 2000

    Willie, Thanks a lot. I have already downloaded manuals and after analysis of them and the machine, came to similar deductions. Just wanted to write them down but you have been quicker. However your explanations are more detailed and I am very gratefull for them. My problem is that the machine...
  6. O

    JLG 600AJ Deutz Year 2000

    The second lamp lighting is system distress but it goes blank few seconds after engine start.
  7. O

    JLG 600AJ Deutz Year 2000

    Hi Willie, Thanks for Ur reply. Machine is european version. Engine is Deutz. ERC are Addco driver and actuator working as team to control engine speed. Lamps: yes they are platform lamps. Those lighting are: 500 lbs (in this case this is 240 kgs) and also system distress lamp and alarm...
  8. O

    JLG 600AJ Deutz Year 2000

    Hi, Made mistake in name of the machine in previous post - so admin the previous post can be cancelled. Have problem with lately acquired JLG. Serial No: 0300053005. Machine is very, very used. Overload lamp is lighting, fault lamp is lighting, throttle regulation is not working. I can not...
  9. O

    JLB 600AJ Deutz Year 2000

    Hi, Have problem with lately acquired JLB. Serial No: 0300053005. Machine is very, very used. Overload lamp is lighting, fault lamp is lighting, throttle regulation is not working. I can not find any overweight sensor so can anyone explain how this signal is generated. Have already...
See more
Top