• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by henry.45

  1. H

    What do you think is the most exciting development in construction technology right now?

    Ha! So John's Wheatland Bakery has clone-making machines for cookies, huh? Who knew mass production could taste so good!
  2. H

    What do you think is the most exciting development in construction technology right now?

    In my opinion, one of the most exciting developments in construction technology right now is the use of 3D printing. What are your views on it?
  3. H

    580B hydraulic fluid /torque tube

    Hello! Welcome to the community of 580B owners. The hydraulic fluid for the bucket and backhoe is typically shared with the torque tube hydraulic fluid. However, it's essential to double-check your specific machine's manual to confirm. Draining and refilling the bottom plugs on the bucket arms...
  4. H

    Aftermarket supplier industry

    Hello Matt, You can Message me on this forums
  5. H

    Aftermarket supplier industry

    Hello! I understand you're a marketing consultant from Toronto, Canada, with experience in business growth and e-commerce. Your plan to buy an online heavy equipment aftermarket parts supplier store and grow its customer base is an exciting venture! I'm here to help. Let me know how I can assist...
  6. H

    Insley H-600 Help

    Hello! Sorry to hear about your grandfather. Unfortunately, Insley H-600 is not a very common tractor, so it might be hard to find information. Can you please tell me more about the tractor's condition? How old is it? Are there any other details or features that you can see? This will help me...
  7. H

    Dresser TD 15c converter stall

    To check the RPMs in a Dresser TD 15C converter stall accurately, you need a tachometer. This device measures the engine's speed in revolutions per minute (RPM). First, make sure the converter stall is engaged. Then, attach the tachometer to the engine according to its instructions. Start the...
  8. H

    jcb P0400 egr code 260 loader

    I understand you're having trouble with a JCB engine (3000 hours) after cleaning the EGR cooler and checking the actuator, exhaust pressure sensor, and mass air sensor. The throttle valve is also working properly. Have you considered checking the fuel injectors and inspecting the engine for any...
  9. H

    D-31 trans problems

    Sorry to hear that your Komatsu dozer won't move after changing the transmission oil and screen. It's possible that the screen orientation is the issue. Check your manual or online resources for an exploded view of the transmission to ensure the screen is installed correctly. Double-check all...
  10. H

    oil cooler return valve

    The restriction valve in a Deere "D" series excavator is important for the hydraulic system. It creates back pressure after the oil cooler, which helps keep the swing motor case full of oil and prevents cylinder cavitation. This is achieved by ensuring a flow of makeup oil and oil through the...
  11. H

    Topcon pipe laser

    Well, It's important to follow the manufacturer's instructions for your specific pipe laser. Generally, the target height should match the pipe diameter. However, some lasers allow for adjustments.
  12. H

    w 220 mill

    There may be a problem with the wiring or a short circuit causing the hood to still try to raise when you try to put it down. It's good that you tried disconnecting the red wire, but it's strange that there is still power going to it. It might be a good idea to check the wiring more closely and...
  13. H

    Dresser TD 15c converter stall

    Increasing the hydraulic oil viscosity to 42 wt might help reduce stalling under heavy loads. However, consider the manufacturer's recommendations and potential impacts on the system's overall performance before making any changes. Consult a professional if needed.
  14. H

    Ditch Witch RT12

    You could try using a small wrench or a socket with a universal joint to reach the jam nut. Applying heat or penetrating oil may also help loosen it. If all else fails, consider taking it to a professional mechanic.
  15. H

    Wake up procedure

    No need to worry, there's no specific re-calibration required for the Genie Z45 after a battery disconnect due to maintenance. However, ensure all systems are functioning properly before operation. Double-check the cooling system, hydraulics, and controls.
See more
Top