• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by dodgeram22871

  1. D

    EX 120-3 Electrical Problems

    hi rtccw37 i am in cork heres my number 086 8293385 give me a shout ,kevin spillane
  2. D

    Hitachi EX330-5 good batteries but no electrical power

    check the fuses check the master switch, when you turn the key is there a clunk , if yes check the power on both sides of the switch.
  3. D

    Hitachi EX-120 manual

    hi hammer, if you have a spare copy
  4. D

    EX300 blowing oil out dipstick

    check the breather on the rocker cover,when was it serviced last, smell the oil you will smell if there is hyd oil mixing,but highly unlightly.
  5. D

    JCB JS220 please help

    whats the hours up in the machine. did you check the turning joint in the middle of it.
  6. D

    Hitachi Ex120 Problem

    cheack out the tread hitachiex120/3 i had the same problem and there is a link how to set an angle sensor
  7. D

    hitachi ex120-3

    hi all thanks all for the info i went to it today, i have 5volts in but 4.97 volts out and when you move the shaft nothing happens so i will order a new one
  8. D

    hitachi ex120-3

    hey jaytech, thanks for that i changed around the 2 loom3 it improverd a small bit also checked the angle sensor i hav 5volts going in but the only way i can 4.5 volts out if i take out the allen studs and turn a good bit nearly 3/4 of a turn
  9. D

    hitachi ex120-3

    hi all i have an ex120-3 that the all movements are gone slow i checked the angle sensor the 2 solinoids on top of the pump there is 95000 hrs up on the pump has anybody any ideas thanks for reading this posting
  10. D

    Purchasing an Articulated Dump Truck

    i have worked on cat,volvo, and bell .volvo the c model they are bulletproof the older cats are very good , the bell are only ok.with the volvo steering fault is the steering very heavy if yes it equiling valve the seals in it are worn just open it change the seals
  11. D

    Klac Quick Coupler

    i have seen a klac on yanmar mini diggers. it is a good and safe system. you will have to change the rangers on your buckets .it has a reverse hangers on the front so if the back clip opens it cannot fall off the front hanger
  12. D

    ex120-5 or fh ex135

    fh 135 came after the ex120-5 they are both very good machines. but for resale value i would go with the ex model
  13. D

    Doosan Machines

    if i got a doosan for nothing i wouldnot take it. i know a guy that has a dx 225 and as soon as warranty is out they give a lot of trouble buy cat,case,hitachi,kobelco,hyundi, but not jcb,doosan
  14. D

    Who builds the best bucket?

    sorry cjphire i had tighe buckets on a ex16 and ex22 and they ripped like wet paper. geith buckets are good . cat buckets are good but costly
  15. D

    So, what kinda teeth go with these shanks?

    its cat 215 tips . remop teeth are good i put them on ajs 130 bucket 2500 hrs ago and they are still good and its digging heavy clay daily digging foundations.
Top