• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Davecase580b

  1. D

    Case 580B shuttle pump...

    The pressure regulator for the tc is on the right side of the spool assembly. Two bolts hold in down it is also where the pressure test port is small plug on the housing. My was acting like yours , cleaning the screen helped some took appart the spool assembly and found the pressure regulator...
  2. D

    Case 580B shuttle pump...

    Drilling an tapping the pan to clean the screen is a good idea mine was covered in old gasket material. Had to make a new screen from a metal kitchen strainer . When I drilled the hole the pilot when through the screen
  3. D

    Case 580B shuttle pump...

    I would check the pressure relief for the torque converter and the clutch and the setting distance for the clutch spool. Also add more fluid the level needs to be checkled with the engine hot.
  4. D

    Case 580B shuttle pump...

    Hello new to this forum. I have a case 580bck. Did the tap and clean of intake screen. Found lots of debris. Still low torque converter pressure. pulled control valve. Pressure regulators for clutch and torque converter were stuck. Having trouble finding parts especially the gaskets for...
See more
Top