• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Brad1979

  1. B

    1845c lift problems

    I have a 1845c to use around the house. I noticed tonight while moving dirt that it will not lift up unless I have the throttle up higher than I normally would. Even then it's very slow. I have had hydraulic problems in the past and replaced one of the drive pumps. The tilt function is operating...
  2. B

    Case 1845c won't drive on right side

    Yes my tractor parts place was able to find a reman for $2100. Everything seems to be working good.
  3. B

    Case 1845C weak right side

    Somewhat good news one of the other shops found a reman. For $2100 + core exchange and shipping.
  4. B

    Case 1845C weak right side

    they called today and said we would be better off to buy a reman or new one at a price tag of $2700 it would cost more in parts and labor to rebuild my. I've got another shop checking on prices also.
  5. B

    Case 1845C weak right side

    Yes it did switch sides.
  6. B

    Case 1845C weak right side

    I'm replacing the tandem pump in my 1845c only after replacing the drive motor for the right side. I took the drive motor to 2 different hydraulic Shops both said it was bad so we replaced with a new one cost about $900. But after new one was installed still the same thing wouldn't hardly pull...
  7. B

    New drive motor same old problem on 1845c

    So would I have to replace the whole drive pump or can I just replace or rebuild the one on the right side
  8. B

    New drive motor same old problem on 1845c

    I asked the hydraulic shop if the failed drive motor could have put shavings into the system, they said that the rotating group was just wore out so no contamination according to both shops I took it to. The pump for just that side how could I test for something like that?
  9. B

    New drive motor same old problem on 1845c

    Ok I bought a new drive motor for the right side. When both levers are pushed forward or pulled back for reverse it works fine but if I just push the right side forward it moves but very slow. Also when going straight forward I have to hold back the left side so what is going on now what should...
  10. B

    New drive motor

    Ok I bought a new drive motor for the right side. When both levers are pushed forward or pulled back for reverse it works fine but if I just push the right side forward it moves but very slow. Also when going straight forward I have to hold back the left side so what is going on now what should...
  11. B

    Case 1845c won't drive on right side

    No I took the old drive motor to 2 hydraulic shops and both said the rotating group was wore out. I'm having one shop rebuild the old one so that I have a spare or whatever I want to do with it. But I have not done any test on the main pump, I don't know how and I probably don't have the proper...
  12. B

    Case 1845c won't drive on right side

    Ok I bought a new drive motor for the right side. When both levers are pushed forward or pulled back for reverse it works fine but if I just push the right side forward it moves but very slow. Also when going straight forward I have to hold back the left side so what is going on now what should...
  13. B

    1845c aux. hook up help

    I'm just looking to be able to run backhoe attach. or something like a rock hound, log splitter grapple bucket maybe fence post driver stuff like that
  14. B

    1845c aux. hook up help

    ok I'll check with csi I have seen there add in the tractor books thanks for the help.
  15. B

    1845c aux. hook up help

    I'm looking for some assistance I was told when I bought this that all I needed to do to have aux hook ups was to get the pedal and plumb the necessary hoses. Is this correct? Where would be a good place to get the parts? And does anyone know of a step by step instructional video or article...
See more
Top