• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Bkish07

  1. B

    Volvo EW 210C Slow Boom Control Response

    Does anything change when you increase the engine rpm's?
  2. B

    Can a skid steer engine be pulled from pumps by unbolting only pump

    Take the bolts out that are circled in green. Then pull engine out. I think there is a coupler on the end of the pump that won't pull through the pump mounting plate. That's why u have to take out the ring of bolts. It's been a few years sense I've done one.
  3. B

    05 volvo l60e transmission problem

    If there is any kind of metal in your filter consider your transmission bad. It's definitely going to need a rebuild.
  4. B

    Volvo A30C Transmission Problems

    I had the same problem with the same machine in the end one of the clutch packs welded itself together. We did harnesses solenoids ECM the same stuff you have done and in the end it was the transmission needed a rebuild.
  5. B

    Boom suspension trouble l180f

    Check for volvtage at your bss solenoids.
  6. B

    Boom suspension trouble l180f

    From my experience it's either a BSs solenoid or you have bad packings in one of the cylinders. You should be able to swap the solenoids out with each other. If a accumulator was bad you would feel a thump when BSS is turned on but have no softness in the boom. And your boom would not drift down.
Top