• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by baexcavating

  1. baexcavating

    Demo bid

    Bidding a demo on a 12,000 square ft stick built restaurant. Single story, 3 rooms(2 open dining rooms and kitchen). 11,100 sq ft basement with 9ft walls. All building materials go to landfill, crushing concrete on site to be used as base for new parking lot. Wondering what a few others would...
  2. baexcavating

    Daewoo Solar 450-3 electrical problem

    Did you ever find a parts machine? I have a 450LC-3 that needs a swing reduction planetary...
  3. baexcavating

    Reading a 637 scraper

    Looking at buying a pair of 637 scraper's... Wondering what kind of trouble I would get in by driving them home about 600 miles vs hauling them and buying all the permits. I know it's probably a bad idea, but who has done it and how bad can it really be?
  4. baexcavating

    Daewoo/Solar 450-III boom hydraulic issue

    I temporarily resolved the issue by removing the check valve on the boom lowering circuit. Not the right way to fix it, but works fine til I can pull it all apart and figure it out this winter
  5. baexcavating

    Daewoo/Solar 450-III boom hydraulic issue

    For some reason I can't open the file you sent.
  6. baexcavating

    Daewoo/Solar 450-III boom hydraulic issue

    I swapped the check valve (assuming that's what it is) from the raise side into it and problem remains the same...
  7. baexcavating

    Daewoo/Solar 450-III boom hydraulic issue

    I have an issue on my 450 Daewoo, for some reason that I can't find, the book will hydraulically lock when trying to go down. Sometimes you can get it to work by moving the stick, but other times you have to take what appears to be a check valve out to get it to drop. Hope someone has some...
  8. baexcavating

    Apt building weight per square foot

    Bidding a apt building demo, 2 story, 24 unit with full basement, brick exterior. Looking for a rough estimate on a weight per square foot.
  9. baexcavating

    looking for steerable tag axles

    Need a pair of steerable tag axles priced reasonable. Pm me with what you have. Prefer hub pilot, but would consider bud... no daytons
  10. baexcavating

    Gray Market

    I have been wondering the same thing. Did you ever get the info you were looking for?
  11. baexcavating

    anyone straightened a rgn that was oveyloaded?

    Nothing too drastic... It just has about an inch sag over the length of the well.
  12. baexcavating

    anyone straightened a rgn that was oveyloaded?

    He put 100k on a 35 ton trailer that's 22 years old.
  13. baexcavating

    anyone straightened a rgn that was oveyloaded?

    I'm use to doing all my repairs myself, and would like to learn how to do this. I plan on calling a shop that does this tomorrow to ask the best way to do it. I like to check with as many sources as possible before attempting a major project for the first time
  14. baexcavating

    anyone straightened a rgn that was oveyloaded?

    Long story made short... Let a guy use my Rodgers RGN and he overloaded it to the point that the I beam frame rails are bowed down an inch instead of being arched up. I need to know if there is a good way to straighten them, or if I should cut them out and replace them.
  15. baexcavating

    Any input on Trimble CR600 reciever?

    The only problem with that is LR60 is 6 times the price. no exaggeration. 359 vs 2450
See more
Top