• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Mustang 930 940 960 Have Manual Will email

joestewart

joestewart

Well-Known Member
Joined
Oct 14, 2009
Messages
204
Location
Lafayette, LA
I just acquired the factory service manual for the 930 940 and 960 in pdf format. The scans aren't the greatest quality, but they are readable. If anyone needs a page or two to help them in their repairs, I'd be happy to share. Just need a valid email address. J. Stewart
 
R

rsfry

New Member
Joined
Mar 24, 2010
Messages
2
Location
Loring, Ontario, Canada
joestewart said:
I just acquired the factory service manual for the 930 940 and 960 in pdf format. The scans aren't the greatest quality, but they are readable. If anyone needs a page or two to help them in their repairs, I'd be happy to share. Just need a valid email address. J. Stewart
Click to expand...
I just a purchased a 940 Mustang skid steer and looking for a service manual - is it possible to get the complete manual from you?
R Fry
 
W

W4yn3

New Member
Joined
Feb 1, 2011
Messages
1
Location
Australia
I have a 940 and would really appreciate the manual for it. Can you email it to me at wayne.nosenzo@gmail.com please or can you upload to skydrive (if it is too big to email) and give me access via my email? If you need a hotmail address I can give one.
 
S

sgc

Member
Joined
May 10, 2011
Messages
5
Location
Melbourne, Australia
Hi folks,

I just purchased a second-hand 940 and it came without either an operator's or service manual. Does anyone have a copy of either that they can share?

Much appreciated! :)

-- Simon
 
M

Matt j

New Member
Joined
May 12, 2011
Messages
1
Location
Calhoun, KY
Help needed with a mustang 2064

I have owned this skidsteer for about two weeks. It has started perfect everytime. I tried it today and turned over twice and wouldnt even attempt to start. It had blown a fuse, that i replaced . Now all it does is blow fuses. I am lost and looking for some help. I do not have a manual and i believe this would open my eyes alot. Any help would be greatly apprieciated
Thanks matt
 
W

wes10642

New Member
Joined
Aug 29, 2011
Messages
1
Location
texas
mustang repair manual

joestewart said:
I just acquired the factory service manual for the 930 940 and 960 in pdf format. The scans aren't the greatest quality, but they are readable. If anyone needs a page or two to help them in their repairs, I'd be happy to share. Just need a valid email address. J. Stewart
Click to expand...

I need a manual for the 940 and 960 not sure what mine is. I am tring to overhaul hyd. cyl. Thanks a lot Wes email is wes_breiten@yahoo.com Thanks again
 
I

Indians1

New Member
Joined
Dec 7, 2011
Messages
4
Location
wichita, Ks.
I just bought a Mustang 940. I know it sounds stupid, but is the hyd. oil dipstick in the tank? If not, where is it? No sight guage that I can see. Thanks!
 
K

Ken Franz

New Member
Joined
Dec 13, 2011
Messages
2
Location
British Columbia
960 manual

joestewart said:
I just acquired the factory service manual for the 930 940 and 960 in pdf format. The scans aren't the greatest quality, but they are readable. If anyone needs a page or two to help them in their repairs, I'd be happy to share. Just need a valid email address. J. Stewart
Click to expand...

Hi Joe,
Had a leak in my hydraulic line somewhere between the motor and the seat - very hard to see and may need to take the motor out. Does not look like a hose but a metal line that has failed and will need to be replaced but not sure. Any info on that would be most helpful. I would love to get my hands on a complete manual. have looked in the past but could not find one. Where did you get yours?

Thanks!
Ken
 
You must log in or register to reply here.
Top