born2ride
Well-Known Member
Thanks for the help on the HD-5!! So i am back again..Well we picked up this case it does not move forward or reverse. starts and runs well,load and hoe work. think its mid 70 era. I figured out it has a torque converter because the gauge reads zero psi..
i found this plug on the right side of machine.. It seems to have gear fliud in it.. I was thinking it was a fill for the converter pic.
http://i125.photobucket.com/albums/p79/borntworide/IMG_6864.jpg
so i need a direction to go.. i need to know how ,where to fill and check trans fluid.
pix of machine
http://i125.photobucket.com/albums/p79/borntworide/IMG_6865.jpg
thanks B2R
i found this plug on the right side of machine.. It seems to have gear fliud in it.. I was thinking it was a fill for the converter pic.
http://i125.photobucket.com/albums/p79/borntworide/IMG_6864.jpg
so i need a direction to go.. i need to know how ,where to fill and check trans fluid.
pix of machine
http://i125.photobucket.com/albums/p79/borntworide/IMG_6865.jpg
thanks B2R