Bobcat snow blower

[chtucker]

Does erskine still make the Bobcat brand skid steer snow blower? The one that I used last winter had a goofy cable system to rotate the chute. When shaking the blower to clear a clog the chute wanted to self destruct....

Does anyone make a narrow, but taller snow blower? Most of them are 33" or so tall... I was thinking double auger, but only 6' wide...

On a side note, does anyone have pictures of snow wolf snow tires?

[KSSS]

Does erskine still make the Bobcat brand skid steer snow blower? The one that I used last winter had a goofy cable system to rotate the chute. When shaking the blower to clear a clog the chute wanted to self destruct....

Does anyone make a narrow, but taller snow blower? Most of them are 33" or so tall... I was thinking double auger, but only 6' wide...

On a side note, does anyone have pictures of snow wolf snow tires?

The Quick Attach/Erskine blower has a chain drive on the chute that is operated by a electric/hyd motor. They make a 6' model that is taller although it is not dual auger (don't think I have ever seen one). The taller models are high flow models (2418). They are an excellent blower.

[Steve Frazier]

Shaking the blower to clear the chute will put undue stress on any blower, it is better to shut down and manually clear it. KSSS' description is accurate, I have a 2418 on my skid steer. I don't think a skid steer will have enough horsepower nor a discharge chute big enough to warrant dual augers.

[MikeS]

Any one use their blowers to shoot the snow into trucks

[turfguy1969]

we have two erskine. one on a Cat 287B and one on Posi trac Rc -60 both have done a fine job. lots of adjustments