PDA

View Full Version : ImpleMax Silt Fencer


PDG X
06-19-2009, 02:15 PM
Does anyone know of a source for silt fence material for the ImpleMax Siltfencer, now that ImpleMax is no longer available ?

Construct'O
06-19-2009, 09:50 PM
Try here:

Utility Pipe Supply Inc
1004 Rail Drive
Woodstock, IL 60098
(815)337-8845

Lorrie Richardson who i talked too.

Here is a link also with some info,but you have to go through the place at the top.
http://siltfenceinnovations.com/

Hope this helps.Good luck:usa

PDG X
06-30-2009, 03:16 PM
Thank you ! they had some. In case anyone wants to know .33/ft

stock
06-30-2009, 05:42 PM
For those of us not from the USA local any chance of a picture or two?? of this silt fence operation.


Stock

Construct'O
07-02-2009, 08:33 AM
Here is a couple where i was getting it ready to use.:usa

stock
07-02-2009, 02:14 PM
So you have a vibrating plough and half bury a roll of mypex geotech for what reason??

Steve Frazier
07-02-2009, 02:39 PM
It's a requirement around jobsites to control silt runoff. In my area if more than 1/2 acre total square footage is disturbed, a silt fence or other control must be installed. The idea is to prevent silt contamination of streams or other water areas.

stock
07-02-2009, 02:52 PM
43736 some thing like this

atgreene
07-04-2009, 02:09 PM
We have to do erosion control on any site, and anything within 250' of the lake is a major pain. I use erosion mulch instead, silt fence is a pita if you have to go through woods and around rocks etc.... For open ground it's not bad, but in woody terrain erosion mulch berms is the way to go, and no clean-up when done, let it rot.