• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Mquinista

    CAT 3200/3300/3400 IP fine timming

    Hy gents, As the title sugests, could someone explain in detail how a dynamic time adjustment is done in a CAT engine of the series above? Specially the road going engines. In 100% mechanical engines. Thanks in advance.
  2. Mquinista

    JD 6600 Shutle Problems

    Hy gents, Got a 12k H JD 6600, with a powerquad and 5 speed range TXM, as far as range module concerns no problem at all, same for 4 speed power shift. Whatever goes wrong with it, its on the FWD/ RWD shutle. Specially FWD. It does not engage well, specially if clutch pedal is depressed. RWD...
  3. Mquinista

    D5H Clutches and brake packs

    Hy gents, Servicing my D5H SN 1DD6574. Looking for a reseal, rebuild in the steer clutches and Brake packs, not able to find it in online parts chatalog. Can someone help with this? Thanks in advance.
  4. Mquinista

    D5H 1DD , TXM problems

    Hy gents, Having problems with our D5H, at TXM level. Machine came from auction, had several problems and many tweeks and turns, wich i almost fix all. Engine is very good for the Age and usage condition, hour metter stoped @ 12k. Machine overcondition confirms. Nevertheless we´ve been...
  5. Mquinista

    CAT pressure senders and switches

    Hy gents, How do one test sender units and sensors on a D5H? So as the gauges? anyone has a table or work card with this info? thanks
  6. Mquinista

    D5H brake /steering clutch reseal

    Hello gents, As the title suggests, how dificult is a field repair on the brakes / steering clutches? Does anyone know a kit for resealing this modules? Machine is 1DD0657XX
  7. Mquinista

    D5 blade numbers

    hy gents , got a blade installed in my dozer with the part number on the pic... Can´t figure out part numbers for cutting edge and end bits for this one... Help would be much apreciated
  8. Mquinista

    D5H spindle

    Hy Gents, A quick one... does anyone here know what type of fabrication process CAT uses for the final drive spindles? Are they cast? or are composed or welded forgings? Its item 1 on the picture Where can i find structure welding parts, like a ripper pocket? and others alike Thanks
  9. Mquinista

    D5H comercial Versions X serial Numbers

    Hy Gents , As the title implies, I´m a bit lost on the serial numbers versus comercial versions... A machine called D5H XL with Powershift TXM is of serial # 8RJXXX correct? A machine Called D5H STD with Powershift TXM is of serial # 8RCXXX Correct? Understood Series I or II means they were...
  10. Mquinista

    Axles on D5H 1DD

    Gents, a stupid question... Looking from the work card on installing and remove the axles in this machine, it mentions 2 axles on the left side!! What lift my eye brow was the fact i only saw 1 left and 1 right in the parts cathalog, and both the same serial number... Can someone throw some...
  11. Mquinista

    D5H 1DD , trans problems

    Hy gents, Got a D5H series II serial nr 1DD 06574, bought in an auction. Machine came with some hacks but everithing was solved by now except the trans strange behaviour. When cold it goes normally into gear, 1 st 2nd or 3rd , fwrd and reverse , works fine, after some heat up 30 mins or so...
  12. Mquinista

    CAT D5H, low boost

    Hy gents, looking for the test procedure and tune for low boost in my D5H, engine 3304 DI, serial nr 1DD06574, Thanks
  13. Mquinista

    D5H engine 3304 IP timming procedure

    Hello gentleman , As the title sugest i´m interested in having a briefing on the correct fuel injection timming procedure for engine 3304 installed in a machine 1DD06574. Only injection pump timming with drip method or Dynamic timing i´m interested, not pump assembly procedure with the lock...
  14. Mquinista

    3304 in D5

    Hy gents, Anyone know valve lash values for 3304 , in metric pls So as injector pop press Thanks.
  15. Mquinista

    D5H exaust parts

    Hy gents, Got a D5H 95 model serial no 1DD06xxx and looking for a part number on exaust system It’s the flange that couples the turbine housing to exaust tube where the muffler seats. It’s a flange with rings in it. Mine was completely rusted away was impossible to recover. Can’t I’d it on web...
  16. Mquinista

    CAT D5H Engine problems

    Hy gents Besides other problems on my D5H, now it’s the engine with a weird behavior… and no power at all… barely can make a turn in 1st gear The machine after I brought it in didn’t had much pushing power, but that was in line with the 12k hour on the clock the seller said. Apparently the...
  17. Mquinista

    D5H eng light,

    Hey gents quick help from experts. Got a D5H 1DD06xxx having some issues, now I realize the eng oil press light is on. With the red warning blinking for periods , not every time. Machine starts cold with light off then after 10 min or less light comes on. Question: where do I tap to ascertain...
  18. Mquinista

    MF Fermec 860 1995

    Hi Gents Have one of this backhoe´s with a slightly damaged wiring, and auto leveler missing some parts... Anyone has a wiring diagram of this thing? And a schematic of this auto leveler parts and functions. Thanks
  19. Mquinista

    JD 6600 engine

    Hy Gents, Recently brought a JD6600 tractor, the engine is smoking and the seller made a fair price reduction, been digging around and found out, that i messed up engines and this one has a JD6068 engine underated to 5,9 liter oposed to the common 6.8 ltr... Seems this engine is not so common...
  20. Mquinista

    JD 6600 engine

    Hy Gents, Recently brought a JD6600 tractor, the engine is smoking and the seller made a fair price reduction, been digging around and found out, that i messed up engines and this one has a JD6068 engine underated to 5,9 liter oposed to the common 6.8 ltr... Seems this engine is not so common...
Top